lkml.org 
[lkml]   [2023]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1] arm64: dts: qcom: sa8775p-ride: Update L4C parameters
Date
From: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>

L4c is the supply for UFS vccq, As per UFS spec range of vccq is
1.14V to 1.26V, There are stability issues when operating at
marginal voltage. Hence configure the min and max vccq voltages
to 1.2V.

Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index ab767cfa51ff..26f5a4e0ffed 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -153,8 +153,8 @@

vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
/*
* FIXME: This should have regulator-allow-set-load but
--
2.17.1
\
 
 \ /
  Last update: 2023-07-11 12:43    [W:0.038 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site