lkml.org 
[lkml]   [2023]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net PATCH V5] octeontx2-pf: Add additional check for MCAM rules
Date
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.

Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
---
changes since v4:
- Reformatted text in file otx2_tc.c as per review comment.

.../ethernet/marvell/octeontx2/nic/otx2_flows.c | 8 ++++++++
.../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 15 +++++++++++++++
2 files changed, 23 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index 10e11262d48a..2d7713a1a153 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -872,6 +872,14 @@ static int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
return -EINVAL;

vlan_etype = be16_to_cpu(fsp->h_ext.vlan_etype);
+
+ /* Drop rule with vlan_etype == 802.1Q
+ * and vlan_id == 0 is not supported
+ */
+ if (vlan_etype == ETH_P_8021Q && !fsp->m_ext.vlan_tci &&
+ fsp->ring_cookie == RX_CLS_FLOW_DISC)
+ return -EINVAL;
+
/* Only ETH_P_8021Q and ETH_P_802AD types supported */
if (vlan_etype != ETH_P_8021Q &&
vlan_etype != ETH_P_8021AD)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
index 044cc211424e..d3498f3ecaac 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
@@ -604,6 +604,21 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
return -EOPNOTSUPP;
}

+ if (!match.mask->vlan_id) {
+ struct flow_action_entry *act;
+ int i;
+
+ flow_action_for_each(i, act, &rule->action) {
+ if (act->id == FLOW_ACTION_DROP) {
+ netdev_err(nic->netdev,
+ "vlan tpid 0x%x with vlan_id %d is not supported for DROP rule.\n",
+ ntohs(match.key->vlan_tpid),
+ match.key->vlan_id);
+ return -EOPNOTSUPP;
+ }
+ }
+ }
+
if (match.mask->vlan_id ||
match.mask->vlan_dei ||
match.mask->vlan_priority) {
--
2.25.1
\
 
 \ /
  Last update: 2023-07-10 12:32    [W:0.026 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site