lkml.org 
[lkml]   [2023]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] arm64: dts: qcom: add DP Controller to SM8550 DTS
Date
The DP output is shared with the USB3 SuperSpeed lanes and is
usually connected to an USB-C port which Altmode is controlled
by the PMIC Glink infrastructure.

DT changes tying the DP controller to the USB-C port on the QRD
board will be sent later.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Neil Armstrong (2):
dt-bindings: display: msm: dp-controller: document SM8550 compatible
arm64: dts: qcom: sm8550: add display port nodes

.../bindings/display/msm/dp-controller.yaml | 1 +
arch/arm64/boot/dts/qcom/sm8550.dtsi | 89 +++++++++++++++++++++-
2 files changed, 88 insertions(+), 2 deletions(-)
---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230601-topic-sm8550-upstream-dp-b713ba275d7c

Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2023-06-01 11:53    [W:0.424 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site