lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] arm64: dts: qcom: pmk[345]50: enable reboot reason
Date
Like SA8775P (at [1]), the SM8350, SM8450 & SM8550 platforms uses
the SDAM2 nvmem to pass the reboot reason.

This simply adds the sdam2 and reboot reason nodes
in the pmk8350 and pmk8550 dtsi.

Tested with:

and

triggering the following ABL logs on HDK8450:
KeyPress:0, BootReason:2
Fastboot=1, Recovery:0
and
KeyPress:0, BootReason:1
Fastboot=0, Recovery:1

[1] https://lore.kernel.org/lkml/20230417145536.414490-1-brgl@bgdev.pl/T/

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Neil Armstrong (2):
arm64: dts: qcom: pmk8350: add reboot-mode node using sdam_2 nvmem
arm64: dts: qcom: pmk8550: add reboot-mode node using sdam_2 nvmem

arch/arm64/boot/dts/qcom/pmk8350.dtsi | 23 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pmk8550.dtsi | 23 +++++++++++++++++++++++
2 files changed, 46 insertions(+)
---
base-commit: 92e815cf07ed24ee1c51b122f24ffcf2964b4b13
change-id: 20230503-topic-sm8450-upstream-reboot-reason-e5fc827bac27

Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>

\
 
 \ /
  Last update: 2023-05-03 16:14    [W:0.070 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site