lkml.org 
[lkml]   [2023]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: common: usb-conn-gpio: Set last role to unknown before initial detection
Date
Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.

To avoid this, last_role is set to USB_ROLE_UNKNOWN before
performing the initial detection.

Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
---
drivers/usb/common/usb-conn-gpio.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index e20874c..00af735 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -27,6 +27,8 @@
#define USB_CONN_IRQF \
(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)

+#define USB_ROLE_UNKNOWN -1
+
struct usb_conn_info {
struct device *dev;
struct usb_role_switch *role_sw;
@@ -257,6 +259,9 @@ static int usb_conn_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
device_set_wakeup_capable(&pdev->dev, true);

+ /* Set last role to unknown before performing the initial detection */
+ info->last_role = USB_ROLE_UNKNOWN;
+
/* Perform initial detection */
usb_conn_queue_dwork(info, 0);

--
2.7.4
\
 
 \ /
  Last update: 2023-05-24 10:55    [W:0.094 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site