lkml.org 
[lkml]   [2023]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/phy/sfp.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f0fcb06fbe829..5e515165ceab7 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -406,6 +406,10 @@ static const struct sfp_quirk sfp_quirks[] = {

SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),

+ // HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports
+ // 2600MBd in their EERPOM
+ SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex),
+
// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
// their EEPROM
SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
base-commit: d74aab2ca19842d16815a97d4dd605deaae73c69
--
2.40.0

\
 
 \ /
  Last update: 2023-04-02 13:45    [W:0.071 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site