lkml.org 
[lkml]   [2023]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 06/28] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp


On 08/03/2023 23:57, Wesley Cheng wrote:
> The QC ADSP is able to support USB playback endpoints, so that the main
> application processor can be placed into lower CPU power modes. This adds
> the required AFE port configurations and port start command to start an
> audio session.
>
> Specifically, the QC ADSP can support all potential endpoints that are
> exposed by the audio data interface. This includes, feedback endpoints
> (both implicit and explicit) as well as the isochronous (data) endpoints.
> The size of audio samples sent per USB frame (microframe) will be adjusted
> based on information received on the feedback endpoint.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>

thanks for the work,


Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---
> sound/soc/qcom/qdsp6/q6afe-dai.c | 50 ++++++
> sound/soc/qcom/qdsp6/q6afe.c | 185 ++++++++++++++++++++++-
> sound/soc/qcom/qdsp6/q6afe.h | 46 +++++-
> sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 +++
> sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 +
> sound/soc/qcom/qdsp6/q6routing.c | 9 ++
> 6 files changed, 312 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
> index 8bb7452b8f18..bda79d77c8d8 100644
> --- a/sound/soc/qcom/qdsp6/q6afe-dai.c
> +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
> @@ -111,6 +111,40 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
> return 0;
> }
>
> +static int q6usb_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev);
> + int channels = params_channels(params);
> + int rate = params_rate(params);
> + struct q6afe_usb_cfg *usb = &dai_data->port_config[dai->id].usb_audio;
> +
> + usb->sample_rate = rate;
> + usb->num_channels = channels;
> +
> + switch (params_format(params)) {
> + case SNDRV_PCM_FORMAT_U16_LE:
> + case SNDRV_PCM_FORMAT_S16_LE:
> + case SNDRV_PCM_FORMAT_SPECIAL:
> + usb->bit_width = 16;
> + break;
> + case SNDRV_PCM_FORMAT_S24_LE:
> + case SNDRV_PCM_FORMAT_S24_3LE:
> + usb->bit_width = 24;
> + break;
> + case SNDRV_PCM_FORMAT_S32_LE:
> + usb->bit_width = 32;
> + break;
> + default:
> + dev_err(dai->dev, "%s: invalid format %d\n",
> + __func__, params_format(params));
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int q6i2s_hw_params(struct snd_pcm_substream *substream,
> struct snd_pcm_hw_params *params,
> struct snd_soc_dai *dai)
> @@ -411,6 +445,10 @@ static int q6afe_dai_prepare(struct snd_pcm_substream *substream,
> q6afe_cdc_dma_port_prepare(dai_data->port[dai->id],
> &dai_data->port_config[dai->id].dma_cfg);
> break;
> + case USB_RX:
> + q6afe_usb_port_prepare(dai_data->port[dai->id],
> + &dai_data->port_config[dai->id].usb_audio);
> + break;
> default:
> return -EINVAL;
> }
> @@ -637,6 +675,15 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
> {"TX_CODEC_DMA_TX_5", NULL, "TX_CODEC_DMA_TX_5 Capture"},
> {"RX_CODEC_DMA_RX_6 Playback", NULL, "RX_CODEC_DMA_RX_6"},
> {"RX_CODEC_DMA_RX_7 Playback", NULL, "RX_CODEC_DMA_RX_7"},
> +
> + /* USB playback AFE port receives data for playback, hence use the RX port */
> + {"USB Playback", NULL, "USB_RX"},
> +};
> +
> +static const struct snd_soc_dai_ops q6usb_ops = {
> + .prepare = q6afe_dai_prepare,
> + .hw_params = q6usb_hw_params,
> + .shutdown = q6afe_dai_shutdown,
> };
>
> static const struct snd_soc_dai_ops q6hdmi_ops = {
> @@ -952,6 +999,8 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
> 0, SND_SOC_NOPM, 0, 0),
> SND_SOC_DAPM_AIF_IN("RX_CODEC_DMA_RX_7", "NULL",
> 0, SND_SOC_NOPM, 0, 0),
> +
> + SND_SOC_DAPM_AIF_IN("USB_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
> };
>
> static const struct snd_soc_component_driver q6afe_dai_component = {
> @@ -1068,6 +1117,7 @@ static int q6afe_dai_dev_probe(struct platform_device *pdev)
> cfg.q6i2s_ops = &q6i2s_ops;
> cfg.q6tdm_ops = &q6tdm_ops;
> cfg.q6dma_ops = &q6dma_ops;
> + cfg.q6usb_ops = &q6usb_ops;
> dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais);
>
> return devm_snd_soc_register_component(dev, &q6afe_dai_component, dais, num_dais);
> diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
> index 919e326b9462..43baf93f9c89 100644
> --- a/sound/soc/qcom/qdsp6/q6afe.c
> +++ b/sound/soc/qcom/qdsp6/q6afe.c
> @@ -34,6 +34,8 @@
> #define AFE_MODULE_TDM 0x0001028A
>
> #define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235
> +#define AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS 0x000102A5
> +#define AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT 0x000102AA
>
> #define AFE_PARAM_ID_LPAIF_CLK_CONFIG 0x00010238
> #define AFE_PARAM_ID_INT_DIGITAL_CDC_CLK_CONFIG 0x00010239
> @@ -43,6 +45,7 @@
> #define AFE_PARAM_ID_TDM_CONFIG 0x0001029D
> #define AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG 0x00010297
> #define AFE_PARAM_ID_CODEC_DMA_CONFIG 0x000102B8
> +#define AFE_PARAM_ID_USB_AUDIO_CONFIG 0x000102A4
> #define AFE_CMD_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f4
> #define AFE_CMD_RSP_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f5
> #define AFE_CMD_REMOTE_LPASS_CORE_HW_DEVOTE_REQUEST 0x000100f6
> @@ -71,12 +74,16 @@
> #define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1
> #define AFE_LINEAR_PCM_DATA 0x0
>
> +#define AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG 0x1
>
> /* Port IDs */
> #define AFE_API_VERSION_HDMI_CONFIG 0x1
> #define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E
> #define AFE_PORT_ID_HDMI_OVER_DP_RX 0x6020
>
> +/* USB AFE port */
> +#define AFE_PORT_ID_USB_RX 0x7000
> +
> #define AFE_API_VERSION_SLIMBUS_CONFIG 0x1
> /* Clock set API version */
> #define AFE_API_VERSION_CLOCK_SET 1
> @@ -512,12 +519,109 @@ struct afe_param_id_cdc_dma_cfg {
> u16 active_channels_mask;
> } __packed;
>
> +struct afe_param_id_usb_cfg {
> +/* Minor version used for tracking USB audio device configuration.
> + * Supported values: AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
> + */
> + u32 cfg_minor_version;
> +/* Sampling rate of the port.
> + * Supported values:
> + * - AFE_PORT_SAMPLE_RATE_8K
> + * - AFE_PORT_SAMPLE_RATE_11025
> + * - AFE_PORT_SAMPLE_RATE_12K
> + * - AFE_PORT_SAMPLE_RATE_16K
> + * - AFE_PORT_SAMPLE_RATE_22050
> + * - AFE_PORT_SAMPLE_RATE_24K
> + * - AFE_PORT_SAMPLE_RATE_32K
> + * - AFE_PORT_SAMPLE_RATE_44P1K
> + * - AFE_PORT_SAMPLE_RATE_48K
> + * - AFE_PORT_SAMPLE_RATE_96K
> + * - AFE_PORT_SAMPLE_RATE_192K
> + */
> + u32 sample_rate;
> +/* Bit width of the sample.
> + * Supported values: 16, 24
> + */
> + u16 bit_width;
> +/* Number of channels.
> + * Supported values: 1 and 2
> + */
> + u16 num_channels;
> +/* Data format supported by the USB. The supported value is
> + * 0 (#AFE_USB_AUDIO_DATA_FORMAT_LINEAR_PCM).
> + */
> + u16 data_format;
> +/* this field must be 0 */
> + u16 reserved;
> +/* device token of actual end USB aduio device */
> + u32 dev_token;
> +/* endianness of this interface */
> + u32 endian;
> +/* service interval */
> + u32 service_interval;
> +} __packed;
> +
> +/**
> + * struct afe_param_id_usb_audio_dev_params
> + * @cfg_minor_version: Minor version used for tracking USB audio device
> + * configuration.
> + * Supported values:
> + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
> + * @dev_token: device token of actual end USB aduio device
> + **/
> +struct afe_param_id_usb_audio_dev_params {
> + u32 cfg_minor_version;
> + u32 dev_token;
> +} __packed;
> +
> +/**
> + * struct afe_param_id_usb_audio_dev_lpcm_fmt
> + * @cfg_minor_version: Minor version used for tracking USB audio device
> + * configuration.
> + * Supported values:
> + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
> + * @endian: endianness of this interface
> + **/
> +struct afe_param_id_usb_audio_dev_lpcm_fmt {
> + u32 cfg_minor_version;
> + u32 endian;
> +} __packed;
> +
> +/**
> + * struct afe_param_id_usb_audio_dev_latency_mode
> + * @cfg_minor_version: Minor version used for tracking USB audio device
> + * configuration.
> + * Supported values:
> + * AFE_API_MINOR_VERSION_USB_AUDIO_LATENCY_MODE
> + * @mode: latency mode for the USB audio device
> + **/
> +struct afe_param_id_usb_audio_dev_latency_mode {
> + u32 minor_version;
> + u32 mode;
> +} __packed;
> +
> +#define AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL 0x000102B7
> +
> +/**
> + * struct afe_param_id_usb_audio_svc_interval
> + * @cfg_minor_version: Minor version used for tracking USB audio device
> + * configuration.
> + * Supported values:
> + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
> + * @svc_interval: service interval
> + **/
> +struct afe_param_id_usb_audio_svc_interval {
> + u32 cfg_minor_version;
> + u32 svc_interval;
> +} __packed;
> +
> union afe_port_config {
> struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
> struct afe_param_id_slimbus_cfg slim_cfg;
> struct afe_param_id_i2s_cfg i2s_cfg;
> struct afe_param_id_tdm_cfg tdm_cfg;
> struct afe_param_id_cdc_dma_cfg dma_cfg;
> + struct afe_param_id_usb_cfg usb_cfg;
> } __packed;
>
>
> @@ -832,6 +936,7 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
> RX_CODEC_DMA_RX_6, 1, 1},
> [RX_CODEC_DMA_RX_7] = { AFE_PORT_ID_RX_CODEC_DMA_RX_7,
> RX_CODEC_DMA_RX_7, 1, 1},
> + [USB_RX] = { AFE_PORT_ID_USB_RX, USB_RX, 1, 1},
> };
>
> static void q6afe_port_free(struct kref *ref)
> @@ -1289,6 +1394,81 @@ void q6afe_tdm_port_prepare(struct q6afe_port *port,
> }
> EXPORT_SYMBOL_GPL(q6afe_tdm_port_prepare);
>
> +static int afe_port_send_usb_dev_param(struct q6afe_port *port, struct q6afe_usb_cfg *cfg)
> +{
> + union afe_port_config *pcfg = &port->port_cfg;
> + struct afe_param_id_usb_audio_dev_params usb_dev;
> + struct afe_param_id_usb_audio_dev_lpcm_fmt lpcm_fmt;
> + struct afe_param_id_usb_audio_svc_interval svc_int;
> + int ret = 0;
> +
> + if (!pcfg) {
> + dev_err(port->afe->dev, "%s: Error, no configuration data\n", __func__);
> + ret = -EINVAL;
> + goto exit;
> + }
> +
> + memset(&usb_dev, 0, sizeof(usb_dev));
> + memset(&lpcm_fmt, 0, sizeof(lpcm_fmt));
> + memset(&svc_int, 0, sizeof(svc_int));
> +
> + usb_dev.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
> + q6afe_port_set_param_v2(port, &usb_dev,
> + AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS,
> + AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(usb_dev));
> + if (ret) {
> + dev_err(port->afe->dev, "%s: AFE device param cmd failed %d\n",
> + __func__, ret);
> + goto exit;
> + }
> +
> + lpcm_fmt.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
> + lpcm_fmt.endian = pcfg->usb_cfg.endian;
> + ret = q6afe_port_set_param_v2(port, &lpcm_fmt,
> + AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT,
> + AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(lpcm_fmt));
> + if (ret) {
> + dev_err(port->afe->dev, "%s: AFE device param cmd LPCM_FMT failed %d\n",
> + __func__, ret);
> + goto exit;
> + }
> +
> + svc_int.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
> + svc_int.svc_interval = pcfg->usb_cfg.service_interval;
> + ret = q6afe_port_set_param_v2(port, &svc_int,
> + AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL,
> + AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(svc_int));
> + if (ret) {
> + dev_err(port->afe->dev, "%s: AFE device param cmd svc_interval failed %d\n",
> + __func__, ret);
> + ret = -EINVAL;
> + goto exit;
> + }
> +exit:
> + return ret;
> +}
> +
> +/**
> + * q6afe_usb_port_prepare() - Prepare usb afe port.
> + *
> + * @port: Instance of afe port
> + * @cfg: USB configuration for the afe port
> + *
> + */
> +void q6afe_usb_port_prepare(struct q6afe_port *port,
> + struct q6afe_usb_cfg *cfg)
> +{
> + union afe_port_config *pcfg = &port->port_cfg;
> +
> + pcfg->usb_cfg.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
> + pcfg->usb_cfg.sample_rate = cfg->sample_rate;
> + pcfg->usb_cfg.num_channels = cfg->num_channels;
> + pcfg->usb_cfg.bit_width = cfg->bit_width;
> +
> + afe_port_send_usb_dev_param(port, cfg);
> +}
> +EXPORT_SYMBOL_GPL(q6afe_usb_port_prepare);
> +
> /**
> * q6afe_hdmi_port_prepare() - Prepare hdmi afe port.
> *
> @@ -1611,7 +1791,10 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
> break;
> case AFE_PORT_ID_WSA_CODEC_DMA_RX_0 ... AFE_PORT_ID_RX_CODEC_DMA_RX_7:
> cfg_type = AFE_PARAM_ID_CODEC_DMA_CONFIG;
> - break;
> + break;
> + case AFE_PORT_ID_USB_RX:
> + cfg_type = AFE_PARAM_ID_USB_AUDIO_CONFIG;
> + break;
> default:
> dev_err(dev, "Invalid port id 0x%x\n", port_id);
> return ERR_PTR(-EINVAL);
> diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
> index 30fd77e2f458..e098a3e15135 100644
> --- a/sound/soc/qcom/qdsp6/q6afe.h
> +++ b/sound/soc/qcom/qdsp6/q6afe.h
> @@ -5,7 +5,7 @@
>
> #include <dt-bindings/sound/qcom,q6afe.h>
>
> -#define AFE_PORT_MAX 129
> +#define AFE_PORT_MAX 130
>
> #define MSM_AFE_PORT_TYPE_RX 0
> #define MSM_AFE_PORT_TYPE_TX 1
> @@ -205,6 +205,47 @@ struct q6afe_cdc_dma_cfg {
> u16 active_channels_mask;
> };
>
> +/**
> + * struct q6afe_usb_cfg
> + * @cfg_minor_version: Minor version used for tracking USB audio device
> + * configuration.
> + * Supported values:
> + * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
> + * @sample_rate: Sampling rate of the port
> + * Supported values:
> + * AFE_PORT_SAMPLE_RATE_8K
> + * AFE_PORT_SAMPLE_RATE_11025
> + * AFE_PORT_SAMPLE_RATE_12K
> + * AFE_PORT_SAMPLE_RATE_16K
> + * AFE_PORT_SAMPLE_RATE_22050
> + * AFE_PORT_SAMPLE_RATE_24K
> + * AFE_PORT_SAMPLE_RATE_32K
> + * AFE_PORT_SAMPLE_RATE_44P1K
> + * AFE_PORT_SAMPLE_RATE_48K
> + * AFE_PORT_SAMPLE_RATE_96K
> + * AFE_PORT_SAMPLE_RATE_192K
> + * @bit_width: Bit width of the sample.
> + * Supported values: 16, 24
> + * @num_channels: Number of channels
> + * Supported values: 1, 2
> + * @data_format: Data format supported by the USB
> + * Supported values: 0
> + * @reserved: this field must be 0
> + * @dev_token: device token of actual end USB audio device
> + * @endian: endianness of this interface
> + * @service_interval: service interval
> + **/
> +struct q6afe_usb_cfg {
> + u32 cfg_minor_version;
> + u32 sample_rate;
> + u16 bit_width;
> + u16 num_channels;
> + u16 data_format;
> + u16 reserved;
> + u32 dev_token;
> + u32 endian;
> + u32 service_interval;
> +};
>
> struct q6afe_port_config {
> struct q6afe_hdmi_cfg hdmi;
> @@ -212,6 +253,7 @@ struct q6afe_port_config {
> struct q6afe_i2s_cfg i2s_cfg;
> struct q6afe_tdm_cfg tdm;
> struct q6afe_cdc_dma_cfg dma_cfg;
> + struct q6afe_usb_cfg usb_audio;
> };
>
> struct q6afe_port;
> @@ -221,6 +263,8 @@ int q6afe_port_start(struct q6afe_port *port);
> int q6afe_port_stop(struct q6afe_port *port);
> void q6afe_port_put(struct q6afe_port *port);
> int q6afe_get_port_id(int index);
> +void q6afe_usb_port_prepare(struct q6afe_port *port,
> + struct q6afe_usb_cfg *cfg);
> void q6afe_hdmi_port_prepare(struct q6afe_port *port,
> struct q6afe_hdmi_cfg *cfg);
> void q6afe_slim_port_prepare(struct q6afe_port *port,
> diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
> index f67c16fd90b9..39719c3f1767 100644
> --- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
> +++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
> @@ -81,6 +81,26 @@
>
>
> static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
> + {
> + .playback = {
> + .stream_name = "USB Playback",
> + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
> + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
> + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
> + SNDRV_PCM_RATE_192000,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
> + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
> + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
> + .channels_min = 1,
> + .channels_max = 2,
> + .rate_min = 8000,
> + .rate_max = 192000,
> + },
> + .id = USB_RX,
> + .name = "USB_RX",
> + },
> {
> .playback = {
> .stream_name = "HDMI Playback",
> @@ -616,6 +636,9 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
> case WSA_CODEC_DMA_RX_0 ... RX_CODEC_DMA_RX_7:
> q6dsp_audio_fe_dais[i].ops = cfg->q6dma_ops;
> break;
> + case USB_RX:
> + q6dsp_audio_fe_dais[i].ops = cfg->q6usb_ops;
> + break;
> default:
> break;
> }
> diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
> index 7f052c8a1257..d8dde6dd0aca 100644
> --- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
> +++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
> @@ -11,6 +11,7 @@ struct q6dsp_audio_port_dai_driver_config {
> const struct snd_soc_dai_ops *q6i2s_ops;
> const struct snd_soc_dai_ops *q6tdm_ops;
> const struct snd_soc_dai_ops *q6dma_ops;
> + const struct snd_soc_dai_ops *q6usb_ops;
> };
>
> struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
> diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
> index 928fd23e2c27..dc2357b4b2c7 100644
> --- a/sound/soc/qcom/qdsp6/q6routing.c
> +++ b/sound/soc/qcom/qdsp6/q6routing.c
> @@ -514,6 +514,9 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
> return 1;
> }
>
> +static const struct snd_kcontrol_new usb_mixer_controls[] = {
> + Q6ROUTING_RX_MIXERS(USB_RX) };
> +
> static const struct snd_kcontrol_new hdmi_mixer_controls[] = {
> Q6ROUTING_RX_MIXERS(HDMI_RX) };
>
> @@ -949,6 +952,10 @@ static const struct snd_soc_dapm_widget msm_qdsp6_widgets[] = {
> SND_SOC_DAPM_MIXER("MultiMedia8 Mixer", SND_SOC_NOPM, 0, 0,
> mmul8_mixer_controls, ARRAY_SIZE(mmul8_mixer_controls)),
>
> + SND_SOC_DAPM_MIXER("USB Mixer", SND_SOC_NOPM, 0, 0,
> + usb_mixer_controls,
> + ARRAY_SIZE(usb_mixer_controls)),
> +
> };
>
> static const struct snd_soc_dapm_route intercon[] = {
> @@ -1042,6 +1049,8 @@ static const struct snd_soc_dapm_route intercon[] = {
> {"MM_UL6", NULL, "MultiMedia6 Mixer"},
> {"MM_UL7", NULL, "MultiMedia7 Mixer"},
> {"MM_UL8", NULL, "MultiMedia8 Mixer"},
> +
> + Q6ROUTING_RX_DAPM_ROUTE("USB Mixer", "USB_RX"),
> };
>
> static int routing_hw_params(struct snd_soc_component *component,

\
 
 \ /
  Last update: 2023-03-27 00:51    [W:0.369 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site