lkml.org 
[lkml]   [2023]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 11/12] riscv: dts: starfive: visionfive-2-v1.2a: Add gmac+phy's delay configuration
On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@starfivetech.com> wrote:
> v1.2A gmac0 uses motorcomm YT8531(rgmii-id) PHY, and needs delay
> configurations.
>
> v1.2A gmac1 uses motorcomm YT8512(rmii) PHY, and needs to
> switch rx and rx to external clock sources.
>
> Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
> ---
> .../starfive/jh7110-starfive-visionfive-2-v1.2a.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> index 4af3300f3cf3..205a13d8c8b1 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> @@ -11,3 +11,16 @@
> model = "StarFive VisionFive 2 v1.2A";
> compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
> };
> +
> +&gmac1 {
> + phy-mode = "rmii";
> + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>,
> + <&syscrg JH7110_SYSCLK_GMAC1_RX>;
> + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>,
> + <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
> +};
> +
> +&phy0 {
> + rx-internal-delay-ps = <1900>;
> + tx-internal-delay-ps = <1350>;
> +};

Here you're not specifying the internal delays for phy1 which means it
defaults to 1950ps for both rx and tx. Is that right or did you mean
to set them to 0 like the v1.3b phy1?

Also your u-boot seems to set what the linux phy driver calls
motorcomm,keep-pll-enabled and motorcomm,auto-sleep-disabled for all
the phys. Did you leave those out on purpose?

> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

\
 
 \ /
  Last update: 2023-03-27 00:45    [W:0.163 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site