lkml.org 
[lkml]   [2023]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] clk: imx: composite-8m: Add support to determine_rate
From


On 3/19/2023 9:21 PM, Adam Ford wrote:
> Similar to imx/clk-composite-93 and imx/clk-divider-gate, the
> imx8m_clk_composite_divider_ops can support determine_rate.
> Without this the parent clocks are set to a fixed value, and
> if a consumer needs a slower reate, the clock is divided, but
> the division is only as good as the parent clock rate.
>
> With this added, the system can attempt to adjust the parent rate
> if the proper flags are set which can lead to a more precise clock
> value.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
> index cbf0d7955a00..3b63e47f088f 100644
> --- a/drivers/clk/imx/clk-composite-8m.c
> +++ b/drivers/clk/imx/clk-composite-8m.c
> @@ -119,10 +119,17 @@ static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
> return ret;
> }
>
> +static int clk_divider_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + return clk_divider_ops.determine_rate(hw, req);
> +}
> +
> static const struct clk_ops imx8m_clk_composite_divider_ops = {
> .recalc_rate = imx8m_clk_composite_divider_recalc_rate,
> .round_rate = imx8m_clk_composite_divider_round_rate,
> .set_rate = imx8m_clk_composite_divider_set_rate,
> + .determine_rate = clk_divider_determine_rate,

Please align the name with imx8m_ as prefix. Other than that:
Reviewed-by: Peng Fan <peng.fan@nxp.com>

> };
>
> static u8 imx8m_clk_composite_mux_get_parent(struct clk_hw *hw)

\
 
 \ /
  Last update: 2023-03-27 01:12    [W:0.070 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site