Messages in this thread | ![/](/images/icornerl.gif) | | From | Alistair Francis <> | Date | Sun, 26 Feb 2023 15:50:31 +1000 | Subject | Re: [PATCH v3 3/3] ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815 |
| |
On Sun, Feb 26, 2023 at 12:22 AM Matti Vaittinen <mazziesaccount@gmail.com> wrote: > > Hi Alistair, > > On 2/25/23 13:37, Alistair Francis wrote: > > Add support for the rohm,bd71815 power controller controller for the > > reMarkable 2. > > > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > > --- > > arch/arm/boot/dts/imx7d-remarkable2.dts | 158 ++++++++++++++++++++++++ > > 1 file changed, 158 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts > > index 288fc8611117..9ecb733545cc 100644 > > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts > > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts > > @@ -91,6 +91,10 @@ wifi_pwrseq: wifi_pwrseq { > > }; > > }; > > > > +&cpu0 { > > + cpu-supply = <&buck1_reg>; > > +}; > > + > > &clks { > > assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, > > <&clks IMX7D_CLKO2_ROOT_DIV>; > > @@ -118,6 +122,147 @@ wacom_digitizer: digitizer@9 { > > }; > > }; > > > > +&i2c2 { > > + clock-frequency = <100000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c2>; > > + status = "okay"; > > + > > + bd71815: pmic@4b { > > + compatible = "rohm,bd71815"; > > + reg = <0x4b>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_bd71815>; > > + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ > > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; > > + gpio-controller; > > + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; > > + clock-output-names = "bd71815-32k-out"; > > + #clock-cells = <0>; > > + #gpio-cells = <1>; > > + > > + regulators { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + buck1_reg: regulator@0 { > > + reg = <0>; > > + regulator-compatible = "buck1"; > > I'm sure you have learned to regard my comments with certain care ;) (I > think it was you for whom I gave an advice - which resulted a board to > be bricked :| So, please treat my comment as if I did not know what I am > talking about).
That was me! The board wasn't bricked though, luckily as it's my only device. It took a month of full battery discharge cycles but I managed to replace the device tree with a working one :)
> > Anyways, I believe the "regulator-compatible" is deprecated and should > no longer be used to match the node with the regulator? Instead, the > regulator node name itself should be used for the matching. > > ref. > https://elixir.bootlin.com/linux/latest/source/drivers/regulator/of_regulator.c#L380 > > I don't think the regulator-compatible can even be found from the > regulator.yaml binding list...
You're right. Thanks for that, I have removed them and replaced them with "regulator-name" to match the documentation.
> > With this remark - (and what ever it is worth): > Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Thanks!
Alistair
> > -- > Matti Vaittinen > Linux kernel developer at ROHM Semiconductors > Oulu Finland > > ~~ When things go utterly wrong vim users can always type :help! ~~ >
| ![\](/images/icornerr.gif) |