lkml.org 
[lkml]   [2023]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2 1/2] PM: domains: Skip disabling unused domains if provider has sync_state
On 23-02-15 12:57:54, Ulf Hansson wrote:
> On Fri, 27 Jan 2023 at 11:40, Abel Vesa <abel.vesa@linaro.org> wrote:
> >
> > Currently, there are cases when a domain needs to remain enabled until
> > the consumer driver probes. Sometimes such consumer drivers may be built
> > as modules. Since the genpd_power_off_unused is called too early for
> > such consumer driver modules to get a chance to probe, the domain, since
> > it is unused, will get disabled. On the other hand, the best time for
> > an unused domain to be disabled is on the provider's sync_state
> > callback. So, if the provider has registered a sync_state callback,
> > assume the unused domains for that provider will be disabled on its
> > sync_state callback. Also provide a generic sync_state callback which
> > disables all the domains unused for the provider that registers it.
> >
> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > ---
> >
> > This approach has been applied for unused clocks as well.
> > With this patch merged in, all the providers that have sync_state
> > callback registered will leave the domains enabled unless the provider's
> > sync_state callback explicitly disables them. So those providers will
> > need to add the disabling part to their sync_state callback. On the
> > other hand, the platforms that have cases where domains need to remain
> > enabled (even if unused) until the consumer driver probes, will be able,
> > with this patch in, to run without the pd_ignore_unused kernel argument,
> > which seems to be the case for most Qualcomm platforms, at this moment.
>
> My apologies for the somewhat late reply. Please see my comments below.
>
> >
> > The v1 is here:
> > https://lore.kernel.org/all/20230126234013.3638425-1-abel.vesa@linaro.org/
> >
> > Changes since v1:
> > * added a generic sync state callback to be registered by providers in
> > order to disable the unused domains on their sync state. Also
> > mentioned this in the commit message.
> >
> > drivers/base/power/domain.c | 17 ++++++++++++++++-
> > include/linux/pm_domain.h | 3 +++
> > 2 files changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> > index 84662d338188..c2a5f77c01f3 100644
> > --- a/drivers/base/power/domain.c
> > +++ b/drivers/base/power/domain.c
> > @@ -1099,7 +1099,8 @@ static int __init genpd_power_off_unused(void)
> > mutex_lock(&gpd_list_lock);
> >
> > list_for_each_entry(genpd, &gpd_list, gpd_list_node)
> > - genpd_queue_power_off_work(genpd);
> > + if (!dev_has_sync_state(genpd->provider->dev))
>
> Unfortunately, this doesn't really help, due to the fact that a
> genpd's ->power_off() callback may get called anyway. At power off,
> the genpd core only cares about those consumers that are currently
> attached, not those that might get attached at some point later in
> time.
>
> In other words, it's the responsibility for each specific genpd
> provider to cope with the condition that its ->sync_state() callback
> may *not* have been called, while its ->power_off() callback is being
> called.
>
> In these cases, the genpd provider should probably make the
> ->power_off() callback to return -EBUSY. This is what we do in
> psci_pd_power_off(), for example.
>

Hmm, this might actually be a better idea. Bjorn, do you agree?

> > + genpd_queue_power_off_work(genpd);
> >
> > mutex_unlock(&gpd_list_lock);
> >
> > @@ -1107,6 +1108,20 @@ static int __init genpd_power_off_unused(void)
> > }
> > late_initcall(genpd_power_off_unused);
> >
> > +void genpd_power_off_unused_sync_state(struct device *dev)
> > +{
> > + struct generic_pm_domain *genpd;
> > +
> > + mutex_lock(&gpd_list_lock);
> > +
> > + list_for_each_entry(genpd, &gpd_list, gpd_list_node)
> > + if (genpd->provider->dev == dev)
> > + genpd_queue_power_off_work(genpd);
> > +
> > + mutex_unlock(&gpd_list_lock);
> > +}
> > +EXPORT_SYMBOL_GPL(genpd_power_off_unused_sync_state);
>
> I don't think this function is needed at all.
>
> In fact, this part of the problem that you are trying to solve should
> already be managed by the driver core, as it calls
> dev->pm_domain->sync() (which is assigned to genpd_dev_pm_sync()) , in
> really_probe(). Or isn't that taking care of the problem for you?

Hmm, I missed the genpd_dev_pm_sync scenario entirely. Yes, that is
actually what is needed, and yes, this function I added here is useless
in this case.

>
> > +
> > #ifdef CONFIG_PM_SLEEP
> >
> > /**
> > diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
> > index f776fb93eaa0..1fd5aa500c81 100644
> > --- a/include/linux/pm_domain.h
> > +++ b/include/linux/pm_domain.h
> > @@ -351,6 +351,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev,
> > unsigned int index);
> > struct device *genpd_dev_pm_attach_by_name(struct device *dev,
> > const char *name);
> > +void genpd_power_off_unused_sync_state(struct device *dev);
> > #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */
> > static inline int of_genpd_add_provider_simple(struct device_node *np,
> > struct generic_pm_domain *genpd)
> > @@ -419,6 +420,8 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
> > {
> > return ERR_PTR(-EOPNOTSUPP);
> > }
> > +
> > +static inline genpd_power_off_unused_sync_state(struct device *dev) {}
> > #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
> >
> > #ifdef CONFIG_PM
> > --
> > 2.34.1
> >
>
> Kind regards
> Uffe

\
 
 \ /
  Last update: 2023-03-27 00:24    [W:0.161 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site