lkml.org 
[lkml]   [2023]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] arm64: qcom: add initial support for qcom sa8775p-ride
Date
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This iteration contains a fixed DTS and all not already applied DT bindings
patches (with tags collected).

v2 -> v3:
- reorder properties (reg always first, etc.)
- tweak node names
- remove properties filled in by the firmware

v1 -> v2:
- lots of improvements all around the place to make the dts pass dtbs_check
(with some additional patches fixing bugs in existing dt bindings),
make dtbs W=1 and checkpatch.pl
- move board-specific properties to the board .dts file
- ordered top-level nodes alphabetically and sub-nodes by the reg property
- fixed licensing
- set #address-cells and #size-cells to <2> in the soc node and update sub-nodes

Bartosz Golaszewski (5):
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
dt-bindings: arm: qcom: add the sa8775p-ride board
arm64: dts: qcom: add initial support for qcom sa8775p-ride

.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/firmware/qcom,scm.yaml | 1 +
.../bindings/mailbox/qcom-ipcc.yaml | 1 +
.../bindings/watchdog/qcom-wdt.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 47 +
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 812 ++++++++++++++++++
7 files changed, 870 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts
create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi

--
2.37.2

\
 
 \ /
  Last update: 2023-03-27 00:06    [W:4.039 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site