lkml.org 
[lkml]   [2023]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/panel: re-alphabetize the menu list
Date
A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++----------------
1 file changed, 45 insertions(+), 45 deletions(-)

diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -95,34 +95,6 @@ config DRM_PANEL_LVDS
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.

-config DRM_PANEL_SIMPLE
- tristate "support for simple panels (other than eDP ones)"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- help
- DRM panel driver for dumb non-eDP panels that need at most a regulator
- and a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
-config DRM_PANEL_EDP
- tristate "support for simple Embedded DisplayPort panels"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_DP_AUX_BUS
- select DRM_KMS_HELPER
- help
- DRM panel driver for dumb eDP panels that need at most a regulator and
- a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
config DRM_PANEL_EBBG_FT8719
tristate "EBBG FT8719 panel driver"
depends on OF
@@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.

-config DRM_PANEL_SAMSUNG_LD9040
- tristate "Samsung LD9040 RGB/SPI panel"
- depends on OF && SPI
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
with the Magnachip D53E6EA8966 panel IC. This panel receives
video data via DSI but commands via 9-bit SPI using DBI.

+config DRM_PANEL_MANTIX_MLAF057WE51
+ tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Mantix
+ MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+ has a resolution of 720x1440 pixels, a built in backlight and touch
+ controller.
+
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.

-config DRM_PANEL_MANTIX_MLAF057WE51
- tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for the Mantix
- MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
- has a resolution of 720x1440 pixels, a built in backlight and touch
- controller.
-
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
@@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430
DB7430 DPI display controller used in such devices as the
LMS397KF04 480x800 DPI panel.

+config DRM_PANEL_SAMSUNG_LD9040
+ tristate "Samsung LD9040 RGB/SPI panel"
+ depends on OF && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
@@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.

+config DRM_PANEL_EDP
+ tristate "support for simple Embedded DisplayPort panels"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_DP_AUX_BUS
+ select DRM_KMS_HELPER
+ help
+ DRM panel driver for dumb eDP panels that need at most a regulator and
+ a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SIMPLE
+ tristate "support for simple panels (other than eDP ones)"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ help
+ DRM panel driver for dumb non-eDP panels that need at most a regulator
+ and a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
\
 
 \ /
  Last update: 2023-12-07 07:23    [W:0.071 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site