lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
On Mon, Jan 23, 2023 at 12:22:32PM +0100, Luca Weiss wrote:
> On Mon Jan 23, 2023 at 12:15 PM CET, Dmitry Baryshkov wrote:

> > There are two SERDES regions. One used by USB part of the PHY (at
> > 0x1000) and another SERDES region used for DP (at 0x2000). As Johan
> > described below, vendor kernel handles the DP regions in the DP driver.
> > Possibly this caused a confusion on your side.
>
> Ack, I think I got it now. I also see the registers used downstream
> now, e.g.:
>
> techpack/display/pll/dp_pll_10nm_util.c:#define QSERDES_COM_LOCK_CMP2_MODE0 0x009C
>
> So now .dp_serdes should be 0x2000. Do I need to change anything else
> also? I think not?

You also need to add new dp_tx/rx pointers to the offset struct and use
those in favour of the current ones if set. I think we hashed that bit
out in one of the previous versions of this patch.

Johan

\
 
 \ /
  Last update: 2023-03-26 23:52    [W:0.043 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site