lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 2/3] phy: qcom-qmp-combo: Add config for SM6350
From
On Mon Jan 23, 2023 at 1:03 PM CET, Johan Hovold wrote:
> On Mon, Jan 23, 2023 at 12:22:32PM +0100, Luca Weiss wrote:
> > On Mon Jan 23, 2023 at 12:15 PM CET, Dmitry Baryshkov wrote:
>
> > > There are two SERDES regions. One used by USB part of the PHY (at
> > > 0x1000) and another SERDES region used for DP (at 0x2000). As Johan
> > > described below, vendor kernel handles the DP regions in the DP driver.
> > > Possibly this caused a confusion on your side.
> >
> > Ack, I think I got it now. I also see the registers used downstream
> > now, e.g.:
> >
> > techpack/display/pll/dp_pll_10nm_util.c:#define QSERDES_COM_LOCK_CMP2_MODE0 0x009C
> >
> > So now .dp_serdes should be 0x2000. Do I need to change anything else
> > also? I think not?
>
> You also need to add new dp_tx/rx pointers to the offset struct and use
> those in favour of the current ones if set. I think we hashed that bit
> out in one of the previous versions of this patch.

Thanks for the persistent help, I've sent out v4 now, I hope that's good
now and we can get this into v6.3 :)

>
> Johan

\
 
 \ /
  Last update: 2023-03-26 23:52    [W:1.547 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site