lkml.org 
[lkml]   [2023]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] Add Nuvoton NPCM SGPIO feature
Date
This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595)
and parallel to serial IC (HC165), and use APB3 clock to control it.
This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
NPCM7xx/NPCM8xx have two sgpio module each module can support up
to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
GPIO pins have sequential, First half is gpo and second half is gpi.

The datasheet can reference HC165 and HC595.

Jim Liu (3):
gpio: nuvoton: Add Nuvoton NPCM sgpio driver
arm: dts: nuvoton: npcm: Add sgpio feature
dt-bindings: gpio: add NPCM sgpio driver bindings

.../bindings/gpio/nuvoton,sgpio.yaml | 92 +++
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +
.../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 30 +
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-npcm-sgpio.c | 647 ++++++++++++++++++
6 files changed, 808 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
create mode 100644 drivers/gpio/gpio-npcm-sgpio.c

--
2.17.1

\
 
 \ /
  Last update: 2023-03-26 23:34    [W:0.108 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site