lkml.org 
[lkml]   [2022]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 7/7] pwm: lpss: Add a comment to the bypass field
Date
Add a comment to the bypass field based on the commit b997e3edca4f
("pwm: lpss: Set enable-bit before waiting for update-bit
to go low").

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/pwm/pwm-lpss.h | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/pwm/pwm-lpss.h b/drivers/pwm/pwm-lpss.h
index c344921b2cab..8e82eb5a7e00 100644
--- a/drivers/pwm/pwm-lpss.h
+++ b/drivers/pwm/pwm-lpss.h
@@ -25,6 +25,11 @@ struct pwm_lpss_boardinfo {
unsigned long clk_rate;
unsigned int npwm;
unsigned long base_unit_bits;
+ /*
+ * Some versions of the IP may stuck in the state machine if enable
+ * bit is not set, and hence update bit will show busy status till
+ * the reset. For the rest it may be otherwise.
+ */
bool bypass;
/*
* On some devices the _PS0/_PS3 AML code of the GPU (GFX0) device
--
2.35.1
\
 
 \ /
  Last update: 2022-09-27 18:25    [W:0.851 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site