lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/10] crypto: Use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN
On Thu, Apr 21, 2022 at 03:47:30PM +0200, Arnd Bergmann wrote:
> On Thu, Apr 21, 2022 at 3:25 PM Catalin Marinas <catalin.marinas@arm.com> wrote:
> > On Thu, Apr 21, 2022 at 02:28:45PM +0200, Arnd Bergmann wrote:
> > > We also know that larger slabs are all cacheline aligned, so simply
> > > comparing the transfer size is enough to rule out most, in this case
> > > any transfer larger than 96 bytes must come from the kmalloc-128
> > > or larger cache, so that works like before.
> >
> > There's also the case with 128-byte cache lines and kmalloc-192.
>
> Sure, but that's much less common, as the few machines with 128 byte
> cache lines tend to also have cache coherent devices IIRC, so we'd
> skip the bounce buffer entirely.

Do you know which machines still have 128-byte cache lines _and_
non-coherent DMA? If there isn't any that matters, I'd reduce
ARCH_DMA_MINALIGN to 64 now (while trying to get to even smaller kmalloc
caches).

> > > For transfers <=96 bytes, the possibilities are:
> > >
> > > 1.kmalloc-32 or smaller, always needs to bounce
> > > 2. kmalloc-96, but at least one byte in partial cache line,
> > > need to bounce
> > > 3. kmalloc-64, may skip the bounce.
> > > 4. kmalloc-128 or larger, or not a slab cache but a partial
> > > transfer, may skip the bounce.
> > >
> > > I would guess that the first case is the most common here,
> > > so unless bouncing one or two cache lines is extremely
> > > expensive, I don't expect it to be worth optimizing for the latter
> > > two cases.
> >
> > I think so. If someone complains of a performance regression, we can
> > look at optimising the bounce. I have a suspicion the cost of copying
> > two cache lines is small compared to swiotlb_find_slots() etc.
>
> That is possible, and we'd definitely have to watch out for
> performance regressions, I'm just skeptical that the cases that
> suffer from the extra bouncer buffering on 33..64 byte allocations
> benefit much from having a special case if the 1...32 and 65..96
> byte allocations are still slow.
>
> Another simpler way to do this might be to just not create the
> kmalloc-96 (or kmalloc-192) caches, and assuming that any
> transfer >=33 (or 65) bytes is safe.

I'll give the dma bounce idea a go next week, see how it looks.

--
Catalin

\
 
 \ /
  Last update: 2022-04-21 16:45    [W:0.124 / U:25.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site