lkml.org 
[lkml]   [2022]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/10] crypto: Use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN
On Thu, Apr 21, 2022 at 02:28:45PM +0200, Arnd Bergmann wrote:
> On Thu, Apr 21, 2022 at 1:06 PM Catalin Marinas <catalin.marinas@arm.com> wrote:
> > On Thu, Apr 21, 2022 at 12:20:22AM -0700, Christoph Hellwig wrote:
> > > Btw, there is another option: Most real systems already require having
> > > swiotlb to bounce buffer in some cases. We could simply force bounce
> > > buffering in the dma mapping code for too small or not properly aligned
> > > transfers and just decrease the dma alignment.
> >
> > We can force bounce if size is small but checking the alignment is
> > trickier. Normally the beginning of the buffer is aligned but the end is
> > at some sizeof() distance. We need to know whether the end is in a
> > kmalloc-128 cache and that requires reaching out to the slab internals.
> > That's doable and not expensive but it needs to be done for every small
> > size getting to the DMA API, something like (for mm/slub.c):
> >
> > folio = virt_to_folio(x);
> > slab = folio_slab(folio);
> > if (slab->slab_cache->align < ARCH_DMA_MINALIGN)
> > ... bounce ...
> >
> > (and a bit different for mm/slab.c)
>
> I think the decision to bounce or not can be based on the actual
> cache line size at runtime, so most commonly 64 bytes on arm64,
> even though the compile-time limit is 128 bytes.
>
> We also know that larger slabs are all cacheline aligned, so simply
> comparing the transfer size is enough to rule out most, in this case
> any transfer larger than 96 bytes must come from the kmalloc-128
> or larger cache, so that works like before.

There's also the case with 128-byte cache lines and kmalloc-192.

> For transfers <=96 bytes, the possibilities are:
>
> 1.kmalloc-32 or smaller, always needs to bounce
> 2. kmalloc-96, but at least one byte in partial cache line,
> need to bounce
> 3. kmalloc-64, may skip the bounce.
> 4. kmalloc-128 or larger, or not a slab cache but a partial
> transfer, may skip the bounce.
>
> I would guess that the first case is the most common here,
> so unless bouncing one or two cache lines is extremely
> expensive, I don't expect it to be worth optimizing for the latter
> two cases.

I think so. If someone complains of a performance regression, we can
look at optimising the bounce. I have a suspicion the cost of copying
two cache lines is small compared to swiotlb_find_slots() etc.

--
Catalin

\
 
 \ /
  Last update: 2022-04-21 15:26    [W:0.309 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site