lkml.org 
[lkml]   [2022]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] rockchip: support configuring pins as input
Date
Add support for configuring pins as input to the rockchip pinctrl
driver. This is required for example for devices which use non-standard
configurations for gpio interrupts, specifically for the light/proximity
sensor on the RK3399 powered PinePhone Pro (which will be coming
upstream in a future patch series).

Due to the complicated layout of the RK pinctrl/gpio drivers, some extra
work is required to handle deferring the GPIO configuration. On RK3399
the pinctrl driver always probes before the GPIO controller driver, so
the PIN_CONFIG_OUTPUT and PIN_CONFIG_INPUT_ENABLE params both have to be
deferred, this series also reworks the deferred pin handling to be
generic and support any param rather than only the PIN_CONFIG_OUTPUT
param.

---
Caleb Connolly (4):
pinctrl/rockchip: support deferring other gpio params
pinctrl/rockchip: support setting input-enable param
gpio/rockchip: handle deferring input-enable pinconfs
arm64: dts: rockchip: rk3399: add an input enable pinconf

arch/arm64/boot/dts/rockchip/rk3399.dtsi | 16 ++++++
drivers/gpio/gpio-rockchip.c | 29 ++++++++---
drivers/pinctrl/pinctrl-rockchip.c | 64 +++++++++++++++---------
drivers/pinctrl/pinctrl-rockchip.h | 7 ++-
4 files changed, 81 insertions(+), 35 deletions(-)

--
2.35.1

\
 
 \ /
  Last update: 2022-03-28 03:01    [W:0.079 / U:2.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site