lkml.org 
[lkml]   [2022]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] mmc: mtk-sd: Silence delay phase calculation debug log
Date
The driver prints the following log everytime data is written to RPMB:
mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10]

dev_info is used to print that log but it seems that log is only
useful for debbuging. Use dev_dbg instead of dev_info.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/mmc/host/mtk-sd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index d5a9c269d492..05c8b4de46f3 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1914,8 +1914,8 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX;
else
final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX;
- dev_info(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
- delay, len_final, final_phase);
+ dev_dbg(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
+ delay, len_final, final_phase);

delay_phase.maxlen = len_final;
delay_phase.start = start_final;
--
2.34.1
\
 
 \ /
  Last update: 2022-03-11 11:34    [W:0.319 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site