lkml.org 
[lkml]   [2022]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] w1: w1_therm: fixes w1_seq for ds28ea00 sensors
Date
w1_seq was failing due to several devices responding to the
CHAIN_DONE at the same time. Now properly selects the current
device in the chain with MATCH_ROM. Also acknowledgment was
read twice.

Signed-off-by: Lucas Denefle <lucas.denefle@converge.io>
---
drivers/w1/slaves/w1_therm.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 565578002d79..c7b8a8e787e2 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -2089,16 +2089,20 @@ static ssize_t w1_seq_show(struct device *device,
if (sl->reg_num.id == reg_num->id)
seq = i;

+ if (w1_reset_bus(sl->master))
+ goto error;
+
+ /* Put the device into chain DONE state */
+ w1_write_8(sl->master, W1_MATCH_ROM);
+ w1_write_block(sl->master, (u8 *)&rn, 8);
w1_write_8(sl->master, W1_42_CHAIN);
w1_write_8(sl->master, W1_42_CHAIN_DONE);
w1_write_8(sl->master, W1_42_CHAIN_DONE_INV);
- w1_read_block(sl->master, &ack, sizeof(ack));

/* check for acknowledgment */
ack = w1_read_8(sl->master);
if (ack != W1_42_SUCCESS_CONFIRM_BYTE)
goto error;
-
}

/* Exit from CHAIN state */
--
2.35.1
\
 
 \ /
  Last update: 2022-02-23 12:37    [W:0.028 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site