[lkml]   [2022]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/3] arm64: dts: qcom: sm6125: QUPs, SPI and Seine I2C buses
Introduce Qualcomm Universal Peripheral support on SM6125 and define all
known SPI and I2C Serial Engines. On Sony Seine PDX201 all I2C buses
with known-connected hardware are enabled for future hardware mapping,
together with the respective GPI DMA 0 and QUP 0.

Changes since v1:
- Un-downstream pinctrl mapping:
- Remove nested mux {} / config {};
- Remove useless comments;
- Remove unreferenced pinctrl states;
- Use qup14 pinctrl function name instead of unknown qup_14;
- Reword commit message;
- Add iommus to QUP nodes now that this series depends on apps_smmu to
be available;
- Reorder all properties to match other SoCs;
- Reorder/intersperse QUP nodes with GPI DMA nodes to maintain sorting
by address;
- Reorder SPI nodes to fit in with I2C nodes, restoring sorting by
address too;
- Use QCOM_GPI_* constants;
- Adhere to 3 instead of 5 dma cells for gpi_dma.


Depends on:
- SM6125 GPI DMA:

Marijn Suijten (2):
arm64: dts: qcom: sm6125: Add QUPs with SPI and I2C Serial Engines
arm64: dts: qcom: sm6125-seine: Enable GPI DMA 0, QUP 0 and I2C SEs

Martin Botka (1):
arm64: dts: qcom: sm6125: Add pin configs for QUP SPI/I2C Serial

.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 29 +
arch/arm64/boot/dts/qcom/sm6125.dtsi | 522 ++++++++++++++++++
2 files changed, 551 insertions(+)


 \ /
  Last update: 2022-12-17 00:35    [W:0.080 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site