lkml.org 
[lkml]   [2022]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 8/9] dt-bindings: mtd: Split ECC engine with rawnand controller
From
On 28/11/2022 03:06, Xiangsheng Hou wrote:
> Split MediaTek ECC engine with rawnand controller and convert to
> YAML schema.
>
> Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> ---
> .../bindings/mtd/mtk,nand-ecc-engine.yaml | 60 ++++++
> .../devicetree/bindings/mtd/mtk-nand.txt | 176 ------------------
> .../devicetree/bindings/mtd/mtk-nand.yaml | 92 +++++++++
> 3 files changed, 152 insertions(+), 176 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.yaml
>
> diff --git a/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml
> new file mode 100644
> index 000000000000..80321157e928
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml

Wrong vendor prefix. Isn't it mediatek?

> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/mtk,nand-ecc-engine.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek(MTK) SoCs NAND ECC engine
> +
> +maintainers:
> + - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> +
> +description: |
> + MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt2701-ecc
> + - mediatek,mt2712-ecc
> + - mediatek,mt7622-ecc
> +
> + reg:
> + items:
> + - description: Base physical address and size of ECC.
> +
> + interrupts:
> + items:
> + - description: ECC interrupt
> +
> + clocks:
> + minItems: 1

Drop minItems.

> + items:
> + - description: clock used for the controller

Drop items/description - it is obvious, isn't it? Rather maxItems: 1,
Unless controller is not obvious in this context - about which
controller you talk about?

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +unevaluatedProperties: false

Instead: additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt2701-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + soc {
> + #address-cells = <2>;

Mismatched iindentation. 4 spaces for DTS.

> + #size-cells = <2>;
> +
> + bch: ecc@1100e000 {
> + compatible = "mediatek,mt2701-ecc";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI_ECC>;
> + };
> + };
> +
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> deleted file mode 100644
> index 4d3ec5e4ff8a..000000000000
> --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> +++ /dev/null
> @@ -1,176 +0,0 @@
> -MTK SoCs NAND FLASH controller (NFC) DT binding
> -
> -This file documents the device tree bindings for MTK SoCs NAND controllers.
> -The functional split of the controller requires two drivers to operate:
> -the nand controller interface driver and the ECC engine driver.
> -
> -The hardware description for both devices must be captured as device
> -tree nodes.
> -
> -1) NFC NAND Controller Interface (NFI):
> -=======================================
> -
> -The first part of NFC is NAND Controller Interface (NFI) HW.
> -Required NFI properties:
> -- compatible: Should be one of
> - "mediatek,mt2701-nfc",
> - "mediatek,mt2712-nfc",
> - "mediatek,mt7622-nfc".
> -- reg: Base physical address and size of NFI.
> -- interrupts: Interrupts of NFI.
> -- clocks: NFI required clocks.
> -- clock-names: NFI clocks internal name.
> -- ecc-engine: Required ECC Engine node.
> -- #address-cells: NAND chip index, should be 1.
> -- #size-cells: Should be 0.
> -
> -Example:
> -
> - nandc: nfi@1100d000 {
> - compatible = "mediatek,mt2701-nfc";
> - reg = <0 0x1100d000 0 0x1000>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&pericfg CLK_PERI_NFI>,
> - <&pericfg CLK_PERI_NFI_PAD>;
> - clock-names = "nfi_clk", "pad_clk";
> - ecc-engine = <&bch>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> -Platform related properties, should be set in {platform_name}.dts:
> -- children nodes: NAND chips.
> -
> -Children nodes properties:
> -- reg: Chip Select Signal, default 0.
> - Set as reg = <0>, <1> when need 2 CS.
> -Optional:
> -- nand-on-flash-bbt: Store BBT on NAND Flash.
> -- nand-ecc-mode: the NAND ecc mode (check driver for supported modes)
> -- nand-ecc-step-size: Number of data bytes covered by a single ECC step.
> - valid values:
> - 512 and 1024 on mt2701 and mt2712.
> - 512 only on mt7622.
> - 1024 is recommended for large page NANDs.
> -- nand-ecc-strength: Number of bits to correct per ECC step.
> - The valid values that each controller supports:
> - mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
> - 32, 36, 40, 44, 48, 52, 56, 60.
> - mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
> - 32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80.
> - mt7622: 4, 6, 8, 10, 12, 14, 16.
> - The strength should be calculated as follows:
> - E = (S - F) * 8 / B
> - S = O / (P / Q)
> - E : nand-ecc-strength.
> - S : spare size per sector.
> - F : FDM size, should be in the range [1,8].
> - It is used to store free oob data.
> - O : oob size.
> - P : page size.
> - Q : nand-ecc-step-size.
> - B : number of parity bits needed to correct
> - 1 bitflip.
> - According to MTK NAND controller design,
> - this number depends on max ecc step size
> - that MTK NAND controller supports.
> - If max ecc step size supported is 1024,
> - then it should be always 14. And if max
> - ecc step size is 512, then it should be
> - always 13.
> - If the result does not match any one of the listed
> - choices above, please select the smaller valid value from
> - the list.
> - (otherwise the driver will do the adjustment at runtime)
> -- pinctrl-names: Default NAND pin GPIO setting name.
> -- pinctrl-0: GPIO setting node.
> -
> -Example:
> - &pio {
> - nand_pins_default: nanddefault {
> - pins_dat {
> - pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
> - <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
> - <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
> - <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
> - <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
> - <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
> - <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
> - <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
> - <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
> - input-enable;
> - drive-strength = <MTK_DRIVE_8mA>;
> - bias-pull-up;
> - };
> -
> - pins_we {
> - pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
> - drive-strength = <MTK_DRIVE_8mA>;
> - bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> - };
> -
> - pins_ale {
> - pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
> - drive-strength = <MTK_DRIVE_8mA>;
> - bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> - };
> - };
> - };
> -
> - &nandc {
> - status = "okay";
> - pinctrl-names = "default";
> - pinctrl-0 = <&nand_pins_default>;
> - nand@0 {
> - reg = <0>;
> - nand-on-flash-bbt;
> - nand-ecc-mode = "hw";
> - nand-ecc-strength = <24>;
> - nand-ecc-step-size = <1024>;
> - };
> - };
> -
> -NAND chip optional subnodes:
> -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
> -
> -Example:
> - nand@0 {
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - preloader@0 {
> - label = "pl";
> - read-only;
> - reg = <0x00000000 0x00400000>;
> - };
> - android@00400000 {
> - label = "android";
> - reg = <0x00400000 0x12c00000>;
> - };
> - };
> - };
> -
> -2) ECC Engine:
> -==============
> -
> -Required BCH properties:
> -- compatible: Should be one of
> - "mediatek,mt2701-ecc",
> - "mediatek,mt2712-ecc",
> - "mediatek,mt7622-ecc".
> -- reg: Base physical address and size of ECC.
> -- interrupts: Interrupts of ECC.
> -- clocks: ECC required clocks.
> -- clock-names: ECC clocks internal name.
> -
> -Example:
> -
> - bch: ecc@1100e000 {
> - compatible = "mediatek,mt2701-ecc";
> - reg = <0 0x1100e000 0 0x1000>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&pericfg CLK_PERI_NFI_ECC>;
> - clock-names = "nfiecc_clk";
> - };
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.yaml b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml
> new file mode 100644
> index 000000000000..47a1334bcddd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml

Filename more or less matching compatibles, so for example: mediatek,mtk-nfc

> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/mtk-nand.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC) device tree bindings

Drop "device tree bindings"

> +
> +maintainers:
> + - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> +
> +allOf:
> + - $ref: "nand-controller.yaml#"

Drop quotes.

> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt2701-nfc
> + - mediatek,mt2712-nfc
> + - mediatek,mt7622-nfc
> +
> + reg:
> + items:
> + - description: Base physical address and size of NFI.
> +
> + interrupts:
> + items:
> + - description: NFI interrupt
> +
> + clocks:
> + minItems: 2

Drop

> + items:
> + - description: clock used for the controller
> + - description: clock used for the pad
> +
> + clock-names:
> + minItems: 2

Drop

> + items:
> + - const: nfi_clk
> + - const: pad_clk
> +
> + nand-ecc-engine:
> + description: Required ECC Engine node
> + $ref: /schemas/types.yaml#/definitions/phandle

This does not look right. This is a property of NAND chip and original
binding was saying this as well... or was it called ecc-engine in
original bindings? But your commit msg did not explain any differences
from pure conversion.

> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0

Drop, they come from nand-controller.yaml.

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - nand-ecc-engine
> + - "#address-cells"
> + - "#size-cells"

Drop cells here as well.

> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt2701-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + nandc: nfi@1100d000 {
> + compatible = "mediatek,mt2701-nfc";

Messed indentation.

> + reg = <0 0x1100d000 0 0x1000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI>,
> + <&pericfg CLK_PERI_NFI_PAD>;

Non aligned line.

> + clock-names = "nfi_clk", "pad_clk";
> + nand-ecc-engine = <&bch>;
> + #address-cells = <1>;
> + #size-cells = <0>;

Incomplete example.

> + };
> +
> + bch: ecc@1100e000 {
> + compatible = "mediatek,mt2701-ecc";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI_ECC>;
> + };
> + };

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-11-28 10:14    [W:0.238 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site