lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 00/11] RTW88: Add support for USB variants
On Thu, Nov 24, 2022 at 08:26:23AM +0000, Ping-Ke Shih wrote:
>
>
> > -----Original Message-----
> > From: Sascha Hauer <s.hauer@pengutronix.de>
> > Sent: Thursday, November 24, 2022 4:22 PM
> > To: Ping-Ke Shih <pkshih@realtek.com>
> > Cc: Bernie Huang <phhuang@realtek.com>; linux-wireless@vger.kernel.org; Hans Ulli Kroll
> > <linux@ulli-kroll.de>; Martin Blumenstingl <martin.blumenstingl@googlemail.com>; netdev@vger.kernel.org;
> > Kalle Valo <kvalo@kernel.org>; Yan-Hsuan Chuang <tony0620emma@gmail.com>; linux-kernel@vger.kernel.org;
> > Viktor Petrenko <g0000ga@gmail.com>; Neo Jou <neojou@gmail.com>; kernel@pengutronix.de; Johannes Berg
> > <johannes@sipsolutions.net>; Alexander Hochbaum <alex@appudo.com>; Da Xue <da@libre.computer>
> > Subject: Re: [PATCH v3 00/11] RTW88: Add support for USB variants
> >
> > On Thu, Nov 24, 2022 at 06:48:23AM +0000, Ping-Ke Shih wrote:
> > >
> > > > -----Original Message-----
> > > > From: Sascha Hauer <s.hauer@pengutronix.de>
> > > > Sent: Tuesday, November 22, 2022 10:55 PM
> > > > To: Bernie Huang <phhuang@realtek.com>
> > > > Cc: linux-wireless@vger.kernel.org; Ping-Ke Shih <pkshih@realtek.com>; Hans Ulli Kroll
> > > > <linux@ulli-kroll.de>; Martin Blumenstingl <martin.blumenstingl@googlemail.com>;
> > netdev@vger.kernel.org;
> > > > Kalle Valo <kvalo@kernel.org>; Yan-Hsuan Chuang <tony0620emma@gmail.com>;
> > linux-kernel@vger.kernel.org;
> > > > Viktor Petrenko <g0000ga@gmail.com>; Neo Jou <neojou@gmail.com>; Bernie Huang <phhuang@realtek.com>;
> > > > kernel@pengutronix.de; Johannes Berg <johannes@sipsolutions.net>; Alexander Hochbaum
> > <alex@appudo.com>;
> > > > Da Xue <da@libre.computer>
> > > > Subject: Re: [PATCH v3 00/11] RTW88: Add support for USB variants
> > > >
> > > > On Tue, Nov 22, 2022 at 03:52:15PM +0100, Sascha Hauer wrote:
> > > > > This is the third round of adding support for the USB variants to the
> > > > > RTW88 driver. There are a few changes to the last version which make it
> > > > > worth looking at this version.
> > > > >
> > > > > First of all RTL8723du and RTL8821cu are tested working now. The issue
> > > > > here was that the txdesc checksum calculation was wrong. I found the
> > > > > correct calculation in various downstream drivers found on github.
> > > > >
> > > > > The second big issue was that TX packet aggregation was wrong. When
> > > > > aggregating packets each packet start has to be aligned to eight bytes.
> > > > > The necessary alignment was added to the total URB length before
> > > > > checking if there is another packet to aggregate, so the URB length
> > > > > included that padding after the last packet, which is wrong. Fixing
> > > > > this makes the driver work much more reliably.
> > > > >
> > > > > I added all people to Cc: who showed interest in this driver and I want
> > > > > to welcome you for testing and reviewing.
> > > >
> > > > There still is a problem with the RTL8822cu chipset I have here. When
> > > > using NetworkManager I immediately lose the connection to the AP after
> > > > it has been connected:
> > > >
> > > > [ 376.213846] wlan0: authenticate with 76:83:c2:ce:81:b1
> > > > [ 380.085463] wlan0: send auth to 76:83:c2:ce:81:b1 (try 1/3)
> > > > [ 380.091446] wlan0: authenticated
> > > > [ 380.108864] wlan0: associate with 76:83:c2:ce:81:b1 (try 1/3)
> > > > [ 380.136448] wlan0: RX AssocResp from 76:83:c2:ce:81:b1 (capab=0x1411 status=0 aid=2)
> > > > [ 380.202955] wlan0: associated
> > > > [ 380.268140] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> > > > [ 380.275328] wlan0: Connection to AP 76:83:c2:ce:81:b1 lost
> > > >
> > > > That doesn't happen when using plain wpa_supplicant. This seems to go
> > > > down to cd96e22bc1da ("rtw88: add beacon filter support"). After being
> > > > connected I get a BCN_FILTER_CONNECTION_LOSS beacon. Plain
> > > > wpa_supplicant seems to go another code patch and doesn't activate
> > > > connection quality monitoring.
> > > >
> > > > The connection to the AP works fluently also with NetworkManager though
> > > > when I just ignore the BCN_FILTER_CONNECTION_LOSS beacon.
> > > >
> > > > Any idea what may be wrong here?
> > > >
> > >
> > > Please reference to below patch to see if it can work to you.
> > >
> > > https://lore.kernel.org/linux-wireless/20221124064442.28042-1-pkshih@realtek.com/T/#u
> >
> > Great! That solves this issue \o/
> >
>
> Do you mind to add "Tested-by:" tag to the patch? :-)

You should already find it in your inbox. Thank you very much for the
fast response :)

Sascha

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2022-11-24 09:39    [W:0.078 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site