lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 00/11] RTW88: Add support for USB variants
Date
Sascha Hauer <s.hauer@pengutronix.de> writes:

>> > There still is a problem with the RTL8822cu chipset I have here. When
>> > using NetworkManager I immediately lose the connection to the AP after
>> > it has been connected:
>> >
>> > [ 376.213846] wlan0: authenticate with 76:83:c2:ce:81:b1
>> > [ 380.085463] wlan0: send auth to 76:83:c2:ce:81:b1 (try 1/3)
>> > [ 380.091446] wlan0: authenticated
>> > [ 380.108864] wlan0: associate with 76:83:c2:ce:81:b1 (try 1/3)
>> > [ 380.136448] wlan0: RX AssocResp from 76:83:c2:ce:81:b1
>> > (capab=0x1411 status=0 aid=2)
>> > [ 380.202955] wlan0: associated
>> > [ 380.268140] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> > [ 380.275328] wlan0: Connection to AP 76:83:c2:ce:81:b1 lost
>> >
>> > That doesn't happen when using plain wpa_supplicant. This seems to go
>> > down to cd96e22bc1da ("rtw88: add beacon filter support"). After being
>> > connected I get a BCN_FILTER_CONNECTION_LOSS beacon. Plain
>> > wpa_supplicant seems to go another code patch and doesn't activate
>> > connection quality monitoring.
>> >
>> > The connection to the AP works fluently also with NetworkManager though
>> > when I just ignore the BCN_FILTER_CONNECTION_LOSS beacon.
>> >
>> > Any idea what may be wrong here?
>> >
>>
>> Please reference to below patch to see if it can work to you.
>>
>> https://lore.kernel.org/linux-wireless/20221124064442.28042-1-pkshih@realtek.com/T/#u
>
> Great! That solves this issue \o/

Awesome, great work Ping and Ji-Pin!

--
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2022-11-24 09:34    [W:0.044 / U:1.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site