lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] lpfc: Retry FLOGI if previous attempt was rejected with busy
Date
The login state machine stops at the first FLOGI attempt which fails
marked as busy:

lpfc 0000:58:00.0: 1:(0):2858 FLOGI failure Status:x9/x50000 TMO:x14 Data x19140820 x0

Add the FLOGI cmd to the list of commands which are allowed to retry.

Signed-off-by: Daniel Wagner <dwagner@suse.de>
---

we observerd log below during failover operations. With this patch all
is good. FLOGI is retried and succeeds eventually.

lpfc 0000:58:00.0: 29: [ 575.971250] 1:0392 Async Event: word0:x8010140, word1:x3204000, word2:x3, word3:xc0011000
lpfc 0000:58:00.0: 30: [ 575.971260] 1:2896 Async FC event - Speed:8000GBaud Topology:x1 LA Type:x1 Port Type:1 Port Number:0 Logical speed:8000Mbps Fault:0
lpfc 0000:58:00.0: 31: [ 575.971264] 1:(0):0354 Mbox cmd issue - Enqueue Data: x95 (x0/x0) x0 xc600 x2
lpfc 0000:58:00.0: 32: [ 575.971266] 1:(0):0355 Mailbox cmd x95 (x0/x0) issue Data: x0 xc700
lpfc 0000:58:00.0: 33: [ 575.971461] 1:(0):0307 Mailbox cmd x95 (x0/x0) Cmpl lpfc_mbx_cmpl_read_topology [lpfc] Data: x9500 x3 x2001 x1 x80 x277cd000 x44 x80002005 x200a x0 x76cf064 x0
lpfc 0000:58:00.0: 34: [ 575.971472] 1:(0):0354 Mbox cmd issue - Enqueue Data: x8d (x0/x0) x0 xc600 x2
lpfc 0000:58:00.0: 35: [ 575.971473] 1:(0):0354 Mbox cmd issue - Enqueue Data: x7 (x0/x0) x6 xc600 x2
lpfc 0000:58:00.0: 36: [ 575.971475] 1:(0):0355 Mailbox cmd x8d (x0/x0) issue Data: x6 xc700
lpfc 0000:58:00.0: 37: [ 575.971682] 1:(0):0355 Mailbox cmd x7 (x0/x0) issue Data: x6 xc700
lpfc 0000:58:00.0: 38: [ 575.971689] 1:(0):0307 Mailbox cmd x8d (x0/x0) Cmpl lpfc_mbx_cmpl_read_sparam [lpfc] Data: x8d00 x0 x0 x70 x277cd800 x44 x1 x0 x0 x0 x0 x0
lpfc 0000:58:00.0: 39: [ 575.971826] 1:(0):0307 Mailbox cmd x7 (x0/x0) Cmpl lpfc_mbx_cmpl_local_config_link [lpfc] Data: x700 x0 x0 x0 x7d0 x76c xa x0 xf x0 x1800 x0
lpfc 0000:58:00.0: 40: [ 575.971827] 1:(0):0354 Mbox cmd issue - Enqueue Data: x8d (x0/x0) x6 xc600 x2
lpfc 0000:58:00.0: 41: [ 575.971827] 1:(0):0355 Mailbox cmd x8d (x0/x0) issue Data: x6 xc700
lpfc 0000:58:00.0: 42: [ 575.972048] 1:(0):0307 Mailbox cmd x8d (x0/x0) Cmpl lpfc_mbx_cmpl_read_sparam [lpfc] Data: x8d00 x0 x0 x70 x277cd800 x44 x1 x0 x0 x0 x0 x0
lpfc 0000:58:00.0: 43: [ 575.972050] 1:(0):0247 Start Discovery Timer state x7 Data: x21 xffff8804c6b149e8 x0 x0
lpfc 0000:58:00.0: 44: [ 575.972051] 1:(0):0932 FIND node did xfffffe NOT FOUND.
lpfc 0000:58:00.0: 45: [ 575.972052] 1:0001 Allocated rpi:x0 max:x3000 lim:x3000
lpfc 0000:58:00.0: 46: [ 575.972053] 1:(0):0007 Init New ndlp xffff8804c715d000, rpi:x0 DID:fffffe flg:x0 refcnt:1
lpfc 0000:58:00.0: 47: [ 575.972055] 1:(0):0116 Xmit ELS command x4 to remote NPORT xfffffe I/O tag: x2fc0, port state:x7 rpi x0 fc_flag:x810114
lpfc 0000:58:00.0: 48: [ 575.972055] 1:(0):0247 Start Discovery Timer state x7 Data: x21 xffff8804c6b149e8 x0 x0
lpfc 0000:58:00.0: 49: [ 576.011558] 1:0357 ELS CQE error: status=x9: CQE: 2fc00900 00000000 00050000 80010000
lpfc 0000:58:00.0: 50: [ 576.011566] 1:0328 Rsp Ring 2 error: IOCB Data: x40000000 x277cd400 x44 x0 x50000 xfffffe x12fc0 x14428a96 x0 x0 x0 x0 x0 x0 x0 x0
lpfc 0000:58:00.0: 1:(0):2858 FLOGI failure Status:x9/x50000 TMO:x14 Data x19140820 x0


drivers/scsi/lpfc/lpfc_els.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index db5ccae1b63d..1880e95cb785 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4664,7 +4664,8 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
break;

case LSRJT_LOGICAL_BSY:
- if ((cmd == ELS_CMD_PLOGI) ||
+ if ((cmd == ELS_CMD_FLOGI) ||
+ (cmd == ELS_CMD_PLOGI) ||
(cmd == ELS_CMD_PRLI) ||
(cmd == ELS_CMD_NVMEPRLI)) {
delay = 1000;
--
2.29.2
\
 
 \ /
  Last update: 2022-01-10 16:00    [W:0.030 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site