lkml.org 
[lkml]   [2022]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/13] media: marvell-ccic: Use platform_get_irq() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change.
---
drivers/media/platform/marvell-ccic/mmp-driver.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 343ab4f7d807..df16899ab1cb 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -270,12 +270,10 @@ static int mmpcam_probe(struct platform_device *pdev)
* Finally, set up our IRQ now that the core is ready to
* deal with it.
*/
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
- ret = -ENODEV;
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
goto out;
- }
- cam->irq = res->start;
+ cam->irq = ret;
ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED,
"mmp-camera", mcam);
if (ret)
--
2.17.1
\
 
 \ /
  Last update: 2022-01-11 01:24    [W:0.020 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site