lkml.org 
[lkml]   [2021]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [smartpqi updates V2 PATCH 6/9] smartpqi: add PCI-ID for new ntcom controller
From
Date
On 7/13/21 4:02 PM, Don Brace wrote:
> From: Mike McGowen <mike.mcgowen@microchip.com>
>
> Add support for Norsi ntcom Raid-24i controller
> VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161
>
> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
> Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
> Reviewed-by: Scott Teel <scott.teel@microchip.com>
> Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
> Signed-off-by: Don Brace <don.brace@microchip.com>


Acked-by: John Donnelly <john.p.donnelly@oracle.com>


> ---
> drivers/scsi/smartpqi/smartpqi_init.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
> index ffc7ca221e27..c0b181ba795c 100644
> --- a/drivers/scsi/smartpqi/smartpqi_init.c
> +++ b/drivers/scsi/smartpqi/smartpqi_init.c
> @@ -9181,6 +9181,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
> PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> PCI_VENDOR_ID_GIGABYTE, 0x1000)
> },
> + {
> + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> + 0x1dfc, 0x3161)
> + },
> {
> PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
> PCI_ANY_ID, PCI_ANY_ID)
>

\
 
 \ /
  Last update: 2021-07-14 03:22    [W:0.156 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site