lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 06/10] gpio: gpio-aspeed-sgpio: Add AST2400 and AST2500 platform data.


On Tue, 8 Jun 2021, at 19:55, Steven Lee wrote:
> We use platform data to store GPIO pin mask and the max number of
> available GPIO pins for AST2600.
> Refactor driver to also add the platform data for AST2400/AST2500 and
> remove unused MAX_NR_HW_SGPIO and ASPEED_SGPIO_PINS_MASK macros.
>
> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
> ---
> drivers/gpio/gpio-aspeed-sgpio.c | 34 +++++++++++---------------------
> 1 file changed, 12 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
> index ea20a0127748..7d0a4f6fd9d1 100644
> --- a/drivers/gpio/gpio-aspeed-sgpio.c
> +++ b/drivers/gpio/gpio-aspeed-sgpio.c
> @@ -17,21 +17,8 @@
> #include <linux/spinlock.h>
> #include <linux/string.h>
>
> -/*
> - * MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
> - * slots within the clocked serial GPIO data). Since each HW GPIO is both an
> - * input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
> - * device.
> - *
> - * We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
> - * outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
> - */
> -#define MAX_NR_HW_SGPIO 80
> -#define SGPIO_OUTPUT_OFFSET MAX_NR_HW_SGPIO
> -
> #define ASPEED_SGPIO_CTRL 0x54
>
> -#define ASPEED_SGPIO_PINS_MASK GENMASK(9, 6)
> #define ASPEED_SGPIO_CLK_DIV_MASK GENMASK(31, 16)
> #define ASPEED_SGPIO_ENABLE BIT(0)
> #define ASPEED_SGPIO_PINS_SHIFT 6
> @@ -484,6 +471,11 @@ static int aspeed_sgpio_setup_irqs(struct
> aspeed_sgpio *gpio,
> return 0;
> }
>
> +static const struct aspeed_sgpio_pdata ast2400_sgpio_pdata = {
> + .max_ngpios = 80,
> + .pin_mask = GENMASK(9, 6),
> +};
> +
> static const struct aspeed_sgpio_pdata ast2600_sgpiom_128_pdata = {
> .max_ngpios = 128,
> .pin_mask = GENMASK(10, 6),
> @@ -495,8 +487,8 @@ static const struct aspeed_sgpio_pdata
> ast2600_sgpiom_80_pdata = {
> };
>
> static const struct of_device_id aspeed_sgpio_of_table[] = {
> - { .compatible = "aspeed,ast2400-sgpio" },
> - { .compatible = "aspeed,ast2500-sgpio" },
> + { .compatible = "aspeed,ast2400-sgpio", .data = &ast2400_sgpio_pdata,
> },
> + { .compatible = "aspeed,ast2500-sgpio", .data = &ast2400_sgpio_pdata,
> },
> { .compatible = "aspeed,ast2600-sgpiom-128", .data =
> &ast2600_sgpiom_128_pdata, },
> { .compatible = "aspeed,ast2600-sgpiom-80", .data =
> &ast2600_sgpiom_80_pdata, },
> {}
> @@ -521,13 +513,11 @@ static int __init aspeed_sgpio_probe(struct
> platform_device *pdev)
> return PTR_ERR(gpio->base);
>
> pdata = device_get_match_data(&pdev->dev);
> - if (pdata) {
> - gpio->max_ngpios = pdata->max_ngpios;
> - pin_mask = pdata->pin_mask;
> - } else {
> - gpio->max_ngpios = MAX_NR_HW_SGPIO;
> - pin_mask = ASPEED_SGPIO_PINS_MASK;
> - }
> + if (!pdata)
> + return -EINVAL;
> +
> + gpio->max_ngpios = pdata->max_ngpios;
> + pin_mask = pdata->pin_mask;

Hmm, okay, maybe just re-order the patches so this commit comes before the previous one. That way we don't immediately rip out this condition that we just introduced in the previous patch.

I think I suggested squashing it into the previous patch, but with the removal of the comments and macros I think it's worth leaving it separate, just reordered.

Andrew

\
 
 \ /
  Last update: 2021-06-09 02:56    [W:0.614 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site