lkml.org 
[lkml]   [2021]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 08/10] gpio: gpio-aspeed-sgpio: Move irq_chip to aspeed-sgpio struct
Date
The current design initializes irq->chip from a global irqchip struct,
which causes multiple sgpio devices use the same irq_chip.
The patch moves irq_chip to aspeed_sgpio struct for initializing
irq_chip from their private gpio struct.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/gpio/gpio-aspeed-sgpio.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
index 31475846c5fc..38f4900d84bd 100644
--- a/drivers/gpio/gpio-aspeed-sgpio.c
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -30,6 +30,7 @@ struct aspeed_sgpio_pdata {

struct aspeed_sgpio {
struct gpio_chip chip;
+ struct irq_chip intc;
struct clk *pclk;
spinlock_t lock;
void __iomem *base;
@@ -425,14 +426,6 @@ static void aspeed_sgpio_irq_handler(struct irq_desc *desc)
chained_irq_exit(ic, desc);
}

-static struct irq_chip aspeed_sgpio_irqchip = {
- .name = "aspeed-sgpio",
- .irq_ack = aspeed_sgpio_irq_ack,
- .irq_mask = aspeed_sgpio_irq_mask,
- .irq_unmask = aspeed_sgpio_irq_unmask,
- .irq_set_type = aspeed_sgpio_set_type,
-};
-
static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
struct platform_device *pdev)
{
@@ -455,8 +448,14 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
}

+ gpio->intc.name = dev_name(&pdev->dev);
+ gpio->intc.irq_ack = aspeed_sgpio_irq_ack;
+ gpio->intc.irq_mask = aspeed_sgpio_irq_mask;
+ gpio->intc.irq_unmask = aspeed_sgpio_irq_unmask;
+ gpio->intc.irq_set_type = aspeed_sgpio_set_type;
+
irq = &gpio->chip.irq;
- irq->chip = &aspeed_sgpio_irqchip;
+ irq->chip = &gpio->intc;
irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
irq->handler = handle_bad_irq;
irq->default_type = IRQ_TYPE_NONE;
--
2.17.1
\
 
 \ /
  Last update: 2021-06-08 12:27    [W:0.293 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site