lkml.org 
[lkml]   [2021]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] arm64: dts: qcom: sm8150: Disable Adreno and modem by default
Date
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.

Not enabling modem back on the HDK, as it uses a sa8150.

Also fixed a sorting mistake in both boards' dt while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 10 +++++++++-
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 10 +++++++++-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 ++++++
3 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d987a1..50ee3bb97325 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,7 +354,11 @@ vreg_l6f_2p85: ldo6 {
};
};

-&qupv3_id_1 {
+&gmu {
+ status = "okay";
+};
+
+&gpu {
status = "okay";
};

@@ -372,6 +376,10 @@ resin {
};
};

+&qupv3_id_1 {
+ status = "okay";
+};
+
&remoteproc_adsp {
status = "okay";

diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e63416..7de54b2e497e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,7 +349,11 @@ vreg_l6f_2p85: ldo6 {
};
};

-&qupv3_id_1 {
+&gmu {
+ status = "okay";
+};
+
+&gpu {
status = "okay";
};

@@ -367,6 +371,10 @@ resin {
};
};

+&qupv3_id_1 {
+ status = "okay";
+};
+
&remoteproc_adsp {
status = "okay";
firmware-name = "qcom/sm8150/adsp.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 51235a9521c2..618a1e64f808 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1082,6 +1082,8 @@ gpu: gpu@2c00000 {

qcom,gmu = <&gmu>;

+ status = "disabled";
+
zap-shader {
memory-region = <&gpu_mem>;
};
@@ -1149,6 +1151,8 @@ gmu: gmu@2c6a000 {

operating-points-v2 = <&gmu_opp_table>;

+ status = "disabled";
+
gmu_opp_table: opp-table {
compatible = "operating-points-v2";

@@ -1496,6 +1500,8 @@ remoteproc_mpss: remoteproc@4080000 {
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";

+ status = "disabled";
+
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
--
2.32.0
\
 
 \ /
  Last update: 2021-06-11 22:33    [W:1.448 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site