lkml.org 
[lkml]   [2021]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] venus: fix hw overload error log condition
Date
In current video driver, frequency is calculated for all the
running video instances and check aganist maximum supported frequency.
If both calculated frequency and maximum supported frequency are same,
even then HW overload error is printed.
Fix this by printing error log only when frequency is greater than
maximum supported frequency.

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
---
drivers/media/platform/qcom/venus/pm_helpers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index dfe3ee8..9714ca7 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -1083,7 +1083,7 @@ static int load_scale_v4(struct venus_inst *inst)

freq = max(freq_core1, freq_core2);

- if (freq >= table[0].freq) {
+ if (freq > table[0].freq) {
freq = table[0].freq;
dev_warn(dev, "HW is overloaded, needed: %lu max: %lu\n",
freq, table[0].freq);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2021-04-08 15:36    [W:0.204 / U:1.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site