lkml.org 
[lkml]   [2021]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/3] Add irq support to accommodate SC7280 target
Date
The changes in this series adds all the irq related changes which are needed to
support EDP interface coming on sc7280 target.

Changes in this series:
- Currently each interrupt register has a range of 32 indexes only.
But with the introduction of VSYNC and UNDERRUN irq for INTF_5,
the number of irqs under INTR_STATUS will exceed this value.
Increase the range of each interrupt register to 64 indexes
to handle this.

- Changes are added to enable the vsync and underrun irqs for INTF_5 which
is required for edp panel.

- Some irqs which are applicable for sdm845 target are obsolete for sc7180
and sc7280 targets. Support is added to skip all the obsolete irqs based on
the target.

Krishna Manikandan (3):
drm/msm/disp/dpu1: increase the range of interrupts in dpu_irq_map
drm/msm/disp/dpu1: add vsync and underrun irqs for INTF_5
drm/msm/disp/dpu1: add flags to indicate obsolete irqs

drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c | 4 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 9 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 773 +++++++++++++++++++---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 5 +-
5 files changed, 692 insertions(+), 101 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2021-04-06 08:03    [W:0.084 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site