lkml.org 
[lkml]   [2021]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 16/16] soc: imx: gpcv2: remove waiting handshake in power up
Date
From: Peng Fan <peng.fan@nxp.com>

i.MX8MM has blk ctl module, the handshake can only finish after setting
blk ctl. The blk ctl driver will set the bus clk bit and the handshake
will finish there. we just add a delay and suppose the handshake will
finish after that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/soc/imx/gpcv2.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 49dd137f6b94..04564017bfe9 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -251,14 +251,6 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
domain->bits.hskreq, domain->bits.hskreq);

- ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
- reg_val,
- (reg_val & domain->bits.hskack),
- 0, USEC_PER_MSEC);
- if (ret) {
- dev_err(domain->dev, "failed to power up ADB400\n");
- goto out_clk_disable;
- }
}

/* Disable reset clocks for all devices in the domain */
--
2.30.0
\
 
 \ /
  Last update: 2021-04-29 09:03    [W:0.358 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site