lkml.org 
[lkml]   [2021]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: qcom: spmi-mpp: Add compatible for pmi8994
Date
The PMI8994 has 4 multi-purpose-pins, add a compatible for this hardware
block to the MPP driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

PS. I see that while the related gpio driver was converted to hierarchical IRQ
chips the mpp driver didn't get the same treatment. We should fix this at some
point...

Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt | 1 +
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 +
2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
index 0ba07bc96c55..5363d44cbb74 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -21,6 +21,7 @@ of PMIC's from Qualcomm.
"qcom,pmi8950-mpp",
"qcom,pm8994-mpp",
"qcom,pma8084-mpp",
+ "qcom,pmi8994-mpp",

And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
if the device is on an spmi bus or an ssbi bus respectively.
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 3c213f799feb..2da9b5f68f3f 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -920,6 +920,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
{ .compatible = "qcom,pmi8950-mpp" }, /* 4 MPP's */
{ .compatible = "qcom,pm8994-mpp" }, /* 8 MPP's */
{ .compatible = "qcom,pma8084-mpp" }, /* 8 MPP's */
+ { .compatible = "qcom,pmi8994-mpp" }, /* 4 MPP's */
{ .compatible = "qcom,spmi-mpp" }, /* Generic */
{ },
};
--
2.29.2
\
 
 \ /
  Last update: 2021-04-29 02:39    [W:0.033 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site