lkml.org 
[lkml]   [2021]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] extcon-intel-mrfld: initialize mrfld_extcon status
Date
extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.

Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
---
drivers/extcon/extcon-intel-mrfld.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/extcon/extcon-intel-mrfld.c b/drivers/extcon/extcon-intel-mrfld.c
index f47016fb28a8..cd1a5f230077 100644
--- a/drivers/extcon/extcon-intel-mrfld.c
+++ b/drivers/extcon/extcon-intel-mrfld.c
@@ -197,6 +197,7 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
struct regmap *regmap = pmic->regmap;
struct mrfld_extcon_data *data;
+ unsigned int status;
unsigned int id;
int irq, ret;

@@ -244,6 +245,14 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
/* Get initial state */
mrfld_extcon_role_detect(data);

+ /*
+ * Cached status value is used for cable detection, see comments
+ * in mrfld_extcon_cable_detect(), we need to sync cached value
+ * with a real state of the hardware.
+ */
+ regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+ data->status = status;
+
mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);

--
2.27.0
\
 
 \ /
  Last update: 2021-04-24 19:59    [W:0.113 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site