lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
On Tue, Mar 30, 2021 at 2:58 PM Henning Schild
<henning.schild@siemens.com> wrote:
> Am Tue, 30 Mar 2021 14:04:35 +0300
> schrieb Andy Shevchenko <andy.shevchenko@gmail.com>:
> > On Mon, Mar 29, 2021 at 8:59 PM Henning Schild
> > <henning.schild@siemens.com> wrote:
> > >
> > > This driver adds initial support for several devices from Siemens.
> > > It is based on a platform driver introduced in an earlier commit.
> >
> > ...
> >
> > > +#define SIMATIC_IPC_LED_PORT_BASE 0x404E
> >
> > > +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> > > + {1 << 15, "green:" LED_FUNCTION_STATUS "-1" },
> > > + {1 << 7, "yellow:" LED_FUNCTION_STATUS "-1" },
> > > + {1 << 14, "red:" LED_FUNCTION_STATUS "-2" },
> > > + {1 << 6, "yellow:" LED_FUNCTION_STATUS "-2" },
> > > + {1 << 13, "red:" LED_FUNCTION_STATUS "-3" },
> > > + {1 << 5, "yellow:" LED_FUNCTION_STATUS "-3" },
> > > + { }
> > > +};
> >
> > > +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> > > + {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
> > > + {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
> > > + {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
> > > + {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
> > > + {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
> > > + {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
> > > + { }
> > > +};
> >
> > It seems to me like poking GPIO controller registers directly. This
> > is not good. The question still remains: Can we simply register a
> > GPIO (pin control) driver and use an LED GPIO driver with an
> > additional board file that instantiates it?
>
> I wrote about that in reply to the cover letter. My view is still that
> it would be an abstraction with only one user, just causing work and
> likely not ending up as generic as it might eventually have to be.
>
> The region is reserved, not sure what the problem with the "poking" is.


> Maybe i do not understand all the benefits of such a split at this
> point in time. At the moment i only see work with hardly any benefit,
> not just work for me but also for maintainers. I sure do not mean to be
> ignorant. Maybe you go into details and convince me or we wait for other
> peoples opinions on how to proceed, maybe there is a second user that i
> am not aware of?
> Until i am convinced otherwise i will try to argue that a
> single-user-abstraction is needless work/code, and should be done only
> when actually needed.

I have just read your messages (there is a cover letter and additional
email which was sent lately).

I would like to know what the CPU model number on that board is. Than
we can continue to see what possibilities we have here.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-03-30 14:16    [W:0.091 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site