lkml.org 
[lkml]   [2021]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
Am Tue, 30 Mar 2021 14:04:35 +0300
schrieb Andy Shevchenko <andy.shevchenko@gmail.com>:

> On Mon, Mar 29, 2021 at 8:59 PM Henning Schild
> <henning.schild@siemens.com> wrote:
> >
> > This driver adds initial support for several devices from Siemens.
> > It is based on a platform driver introduced in an earlier commit.
>
> ...
>
> > +#define SIMATIC_IPC_LED_PORT_BASE 0x404E
>
> > +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> > + {1 << 15, "green:" LED_FUNCTION_STATUS "-1" },
> > + {1 << 7, "yellow:" LED_FUNCTION_STATUS "-1" },
> > + {1 << 14, "red:" LED_FUNCTION_STATUS "-2" },
> > + {1 << 6, "yellow:" LED_FUNCTION_STATUS "-2" },
> > + {1 << 13, "red:" LED_FUNCTION_STATUS "-3" },
> > + {1 << 5, "yellow:" LED_FUNCTION_STATUS "-3" },
> > + { }
> > +};
>
> > +static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
> > + {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
> > + {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
> > + {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
> > + {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
> > + {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
> > + {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
> > + { }
> > +};
>
> It seems to me like poking GPIO controller registers directly. This
> is not good. The question still remains: Can we simply register a
> GPIO (pin control) driver and use an LED GPIO driver with an
> additional board file that instantiates it?

I wrote about that in reply to the cover letter. My view is still that
it would be an abstraction with only one user, just causing work and
likely not ending up as generic as it might eventually have to be.

The region is reserved, not sure what the problem with the "poking" is.

Maybe i do not understand all the benefits of such a split at this
point in time. At the moment i only see work with hardly any benefit,
not just work for me but also for maintainers. I sure do not mean to be
ignorant. Maybe you go into details and convince me or we wait for other
peoples opinions on how to proceed, maybe there is a second user that i
am not aware of?
Until i am convinced otherwise i will try to argue that a
single-user-abstraction is needless work/code, and should be done only
when actually needed.

regards,
Henning

\
 
 \ /
  Last update: 2021-03-30 13:59    [W:0.090 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site