lkml.org 
[lkml]   [2021]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support
From
Date
Hi Dillon

On 3/12/21 7:24 AM, dillon.minfei@gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> This patch adds STM32H750 pinctrl and GPIO support
> since stm32h750 has the same pin alternate functions
> with stm32h743, so just reuse the stm32h743's pinctrl
> driver
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> ---
> v2:
> - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they
> have same pin alternate functions
> - add STM32H750 to Kconfig description
>
> drivers/pinctrl/stm32/Kconfig | 2 +-
> drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 +++
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
> index f36f29113370..fb1ffc94c57f 100644
> --- a/drivers/pinctrl/stm32/Kconfig
> +++ b/drivers/pinctrl/stm32/Kconfig
> @@ -35,7 +35,7 @@ config PINCTRL_STM32F769
> select PINCTRL_STM32
>
> config PINCTRL_STM32H743
> - bool "STMicroelectronics STM32H743 pin control" if COMPILE_TEST && !MACH_STM32H743
> + bool "STMicroelectronics STM32H743/STM32H750 pin control" if COMPILE_TEST && !MACH_STM32H743
> depends on OF && HAS_IOMEM
> default MACH_STM32H743
> select PINCTRL_STM32
> diff --git a/drivers/pinctrl/stm32/pinctrl-stm32h743.c b/drivers/pinctrl/stm32/pinctrl-stm32h743.c
> index ffe7b5271506..700206c7bc11 100644
> --- a/drivers/pinctrl/stm32/pinctrl-stm32h743.c
> +++ b/drivers/pinctrl/stm32/pinctrl-stm32h743.c
> @@ -1966,6 +1966,9 @@ static const struct of_device_id stm32h743_pctrl_match[] = {
> .compatible = "st,stm32h743-pinctrl",
> .data = &stm32h743_match_data,
> },
> + { .compatible = "st,stm32h750-pinctrl",
> + .data = &stm32h743_match_data,
> + },

If you use exactly the same driver (i.e. same ball out and AF mux) then
you don't have to create a new compatible for that. Just use the same
than h743.(so you don't have to factorize DT files).

Regards
Alex

> { }
> };
>
>

\
 
 \ /
  Last update: 2021-03-29 10:02    [W:0.100 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site