lkml.org 
[lkml]   [2021]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support
From
Date


On 3/29/21 10:07 AM, dillon min wrote:
> On Mon, Mar 29, 2021 at 4:00 PM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
>>
>> Hi Dillon
>>
>> On 3/12/21 7:24 AM, dillon.minfei@gmail.com wrote:
>>> From: dillon min <dillon.minfei@gmail.com>
>>>
>>> This patch adds STM32H750 pinctrl and GPIO support
>>> since stm32h750 has the same pin alternate functions
>>> with stm32h743, so just reuse the stm32h743's pinctrl
>>> driver
>>>
>>> Signed-off-by: dillon min <dillon.minfei@gmail.com>
>>> ---
>>> v2:
>>> - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they
>>> have same pin alternate functions
>>> - add STM32H750 to Kconfig description
>>>
>>> drivers/pinctrl/stm32/Kconfig | 2 +-
>>> drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 +++
>>> 2 files changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
>>> index f36f29113370..fb1ffc94c57f 100644
>>> --- a/drivers/pinctrl/stm32/Kconfig
>>> +++ b/drivers/pinctrl/stm32/Kconfig
>>> @@ -35,7 +35,7 @@ config PINCTRL_STM32F769
>>> select PINCTRL_STM32
>>>
>>> config PINCTRL_STM32H743
>>> - bool "STMicroelectronics STM32H743 pin control" if COMPILE_TEST && !MACH_STM32H743
>>> + bool "STMicroelectronics STM32H743/STM32H750 pin control" if COMPILE_TEST && !MACH_STM32H743
>>> depends on OF && HAS_IOMEM
>>> default MACH_STM32H743
>>> select PINCTRL_STM32
>>> diff --git a/drivers/pinctrl/stm32/pinctrl-stm32h743.c b/drivers/pinctrl/stm32/pinctrl-stm32h743.c
>>> index ffe7b5271506..700206c7bc11 100644
>>> --- a/drivers/pinctrl/stm32/pinctrl-stm32h743.c
>>> +++ b/drivers/pinctrl/stm32/pinctrl-stm32h743.c
>>> @@ -1966,6 +1966,9 @@ static const struct of_device_id stm32h743_pctrl_match[] = {
>>> .compatible = "st,stm32h743-pinctrl",
>>> .data = &stm32h743_match_data,
>>> },
>>> + { .compatible = "st,stm32h750-pinctrl",
>>> + .data = &stm32h743_match_data,
>>> + },
>>
>> If you use exactly the same driver (i.e. same ball out and AF mux) then
>> you don't have to create a new compatible for that. Just use the same
>> than h743.(so you don't have to factorize DT files).
> Okay, yes they are the total same ball out and AF mux. I will delete
> it in the next submission.
> Just a kindly reminder , the newest version of this patchset is [PATCH v6].

Yes I'm late :)

>
> Thanks.
>>
>> Regards
>> Alex
>>
>>> { }
>>> };
>>>
>>>

\
 
 \ /
  Last update: 2021-03-29 12:15    [W:0.176 / U:2.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site