Messages in this thread Patch in this message | | | From | Thomas Schneider <> | Subject | [PATCH] arm64: dts: rockchip: add infrared receiver node to rockpro64 | Date | Wed, 10 Mar 2021 13:28:21 +0100 |
| |
This adds the RockPro64’s infrared receiver to its dtsi. The configuration is almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted from there.
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu> --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 5ab0b9edfc88..d42c75c6dcbd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -36,6 +36,13 @@ power { }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -604,6 +611,12 @@ fusb0_int: fusb0-int { }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_pin: work-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; -- 2.30.1
| |