lkml.org 
[lkml]   [2021]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 051/247] ARM: dts: armada388-helios4: assign pinctrl to LEDs
Date
From: Rosen Penev <rosenp@gmail.com>

[ Upstream commit e011c9025a4691b5c734029577a920bd6c320994 ]

Split up the pins to match earlier definitions. Allows LEDs to flash
properly.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/armada-388-helios4.dts | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa8c680f..e0fa1391948c1 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@

system-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_system_led_pins>;
+
status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@

io-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_io_led_pins>;
+
sata1-led {
label = "helios4:green:ata1";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -291,9 +297,12 @@
"mpp39", "mpp40";
marvell,function = "sd0";
};
- helios_led_pins: helios-led-pins {
- marvell,pins = "mpp24", "mpp25",
- "mpp49", "mpp50",
+ helios_system_led_pins: helios-system-led-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "gpio";
+ };
+ helios_io_led_pins: helios-io-led-pins {
+ marvell,pins = "mpp49", "mpp50",
"mpp52", "mpp53",
"mpp54";
marvell,function = "gpio";
--
2.27.0


\
 
 \ /
  Last update: 2021-03-01 21:07    [W:0.646 / U:1.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site