lkml.org 
[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC/PATCH v2 12/16] drm/v3d: Get rid of pm code
Date
Runtime PM doesn't seem to work correctly on this driver. On top of
that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static
variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
driver's PM ops were not hooked-up.

So, in order to support regular operation with V3D on BCM2711 (Raspberry
Pi 4), get rid of the PM code. PM will be reinstated once we figure out
the underlying issues.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +-----------------
drivers/gpu/drm/v3d/v3d_drv.c | 11 -----------
drivers/gpu/drm/v3d/v3d_gem.c | 9 ---------
3 files changed, 1 insertion(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c
index e76b24bb8828..e1d5f3423059 100644
--- a/drivers/gpu/drm/v3d/v3d_debugfs.c
+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c
@@ -4,7 +4,6 @@
#include <linux/circ_buf.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
-#include <linux/pm_runtime.h>
#include <linux/seq_file.h>

#include <drm/drm_debugfs.h>
@@ -130,11 +129,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
struct drm_device *dev = node->minor->dev;
struct v3d_dev *v3d = to_v3d_dev(dev);
u32 ident0, ident1, ident2, ident3, cores;
- int ret, core;
-
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
+ int core;

ident0 = V3D_READ(V3D_HUB_IDENT0);
ident1 = V3D_READ(V3D_HUB_IDENT1);
@@ -187,9 +182,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
(misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
}

- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
-
return 0;
}

@@ -217,11 +209,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
uint32_t cycles;
int core = 0;
int measure_ms = 1000;
- int ret;
-
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;

if (v3d->ver >= 40) {
V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3,
@@ -245,9 +232,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
cycles / (measure_ms * 1000),
(cycles / (measure_ms * 100)) % 10);

- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
-
return 0;
}

diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c
index 99e22beea90b..7a3336443a12 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.c
+++ b/drivers/gpu/drm/v3d/v3d_drv.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
#include <linux/reset.h>

#include <drm/drm_drv.h>
@@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
{
struct v3d_dev *v3d = to_v3d_dev(dev);
struct drm_v3d_get_param *args = data;
- int ret;
static const u32 reg_map[] = {
[DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG,
[DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1,
@@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
if (args->value != 0)
return -EINVAL;

- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) {
args->value = V3D_CORE_READ(0, offset);
} else {
args->value = V3D_READ(offset);
}
- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
return 0;
}

@@ -271,10 +264,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
return -ENOMEM;
}

- pm_runtime_use_autosuspend(dev);
- pm_runtime_set_autosuspend_delay(dev, 50);
- pm_runtime_enable(dev);
-
ret = v3d_gem_init(drm);
if (ret)
goto dma_free;
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 4eb354226972..75582b03470b 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -6,7 +6,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/sched/signal.h>
#include <linux/uaccess.h>
@@ -372,9 +371,6 @@ v3d_job_free(struct kref *ref)
dma_fence_put(job->irq_fence);
dma_fence_put(job->done_fence);

- pm_runtime_mark_last_busy(job->v3d->drm.dev);
- pm_runtime_put_autosuspend(job->v3d->drm.dev);
-
kfree(job);
}

@@ -441,10 +437,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
job->v3d = v3d;
job->free = free;

- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
-
xa_init_flags(&job->deps, XA_FLAGS_ALLOC);

ret = drm_syncobj_find_fence(file_priv, in_sync, 0, 0, &in_fence);
@@ -460,7 +452,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
return 0;
fail:
xa_destroy(&job->deps);
- pm_runtime_put_autosuspend(v3d->drm.dev);
return ret;
}

--
2.30.0
\
 
 \ /
  Last update: 2021-02-09 14:05    [W:0.127 / U:2.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site