[lkml]   [2021]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[RFC/PATCH v2 00/16] Raspberry PI 4 V3D enablement
This series attempts to enable V3D on BCM2711, the SoC available on the
Raspberry Pi 4 family of boards.

Due to the lack of documentation some things are taken as it from
testing/downstream implementation[1], which I'm hilighting here:

- It's not clear that the following is 100% true, maybe someone can confirm:

"In BCM2711 the new ARGON ASB took over V3D. The old ASB is still
present with the ISP and H264 bits, and V3D is in the same place in the
new ASB as the old one."

- Patch #10 I took as is from the downstream implementation, I can't really
provide an exact explanation on what changed HW wise.

Ultimately, I need confirmation from the Broadcom folks that they are alright
with patch #12 (deleting pm ops in V3D).

With all this, I get a more or less stable experience using mesa 20.3.4 and



Changes since v1:
- Use 'reg-names'
- Correct ASB names
- Add missing binding patch for V3D
- Address Stefan's comments

Nicolas Saenz Julienne (16):
dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
mfd: bcm2835-pm: Rename asb to rpivid_asb
mfd: bcm2835-pm: Use 'reg-names' to get resources
mfd: bcm2835-pm: Add support for BCM2711
soc: bcm: bcm2835-power: Add support for BCM2711's Argon ASB
soc: bcm: bcm2835-power: Bypass power_on/off() calls
dt-bindings: gpu: v3d: Add BCM2711's compatible
drm/v3d: Get rid of pm code
drm/v3d: Add support for bcm2711
ARM: dts: bcm2711: Enable V3D
ARM: configs: Enable DRM_V3D
arm64: config: Enable DRM_V3D

.../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 +
.../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ----------
.../bindings/soc/bcm/brcm,bcm2835-pm.yaml | 88 +++++++++++++++++++
arch/arm/boot/dts/bcm2711.dtsi | 15 +++-
arch/arm/boot/dts/bcm2835-common.dtsi | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 1 +
drivers/gpu/drm/v3d/Kconfig | 2 +-
drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +---
drivers/gpu/drm/v3d/v3d_drv.c | 12 +--
drivers/gpu/drm/v3d/v3d_gem.c | 9 --
drivers/mfd/bcm2835-pm.c | 83 ++++++++++++-----
drivers/soc/bcm/bcm2835-power.c | 82 +++++++++++------
include/linux/mfd/bcm2835-pm.h | 3 +-
14 files changed, 225 insertions(+), 137 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml


 \ /
  Last update: 2021-02-09 14:03    [W:0.116 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site