lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
Date
The current code produces an error message on devm_gpiod_get() errors even
when the error is -EPROBE_DEFER, which should be silent.

This has been observed producing a significant amount of messages like:

xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517

Fix and simplify code by using the dev_err_probe() helper function.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver")
---
drivers/fpga/xilinx-spi.c | 24 +++++++++---------------
1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index 27defa98092d..fee4d0abf6bf 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -233,25 +233,19 @@ static int xilinx_spi_probe(struct spi_device *spi)

/* PROGRAM_B is active low */
conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
- if (IS_ERR(conf->prog_b)) {
- dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
- PTR_ERR(conf->prog_b));
- return PTR_ERR(conf->prog_b);
- }
+ if (IS_ERR(conf->prog_b))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b),
+ "Failed to get PROGRAM_B gpio\n");

conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
- if (IS_ERR(conf->init_b)) {
- dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n",
- PTR_ERR(conf->init_b));
- return PTR_ERR(conf->init_b);
- }
+ if (IS_ERR(conf->init_b))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b),
+ "Failed to get INIT_B gpio\n");

conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
- if (IS_ERR(conf->done)) {
- dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
- PTR_ERR(conf->done));
- return PTR_ERR(conf->done);
- }
+ if (IS_ERR(conf->done))
+ return dev_err_probe(&spi->dev, PTR_ERR(conf->done),
+ "Failed to get DONE gpio\n");

mgr = devm_fpga_mgr_create(&spi->dev,
"Xilinx Slave Serial FPGA Manager",
--
2.30.0
\
 
 \ /
  Last update: 2021-02-04 13:16    [W:0.105 / U:1.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site