lkml.org 
[lkml]   [2021]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp115 ethernet device tree
Hi,

wt., 2 lut 2021 o 09:17 <stefanc@marvell.com> napisał(a):
>
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> CM3 SRAM address space would be used for Flow Control configuration.
>
> Signed-off-by: Stefan Chulski <stefanc@marvell.com>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> ---
> arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 9dcf16b..359cf42 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

The commit message mentions CP115, but the patch updates both CP110
and CP115 - please update one of those (either message or the patch),
so that it is consistent.

Thanks,
Marcin


> @@ -69,6 +69,8 @@
> status = "disabled";
> dma-coherent;
>
> + cm3-mem = <&CP11X_LABEL(cm3_sram)>;
> +
> CP11X_LABEL(eth0): eth0 {
> interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
> <43 IRQ_TYPE_LEVEL_HIGH>,
> @@ -211,6 +213,14 @@
> };
> };
>
> + CP11X_LABEL(cm3_sram): cm3@220000 {
> + compatible = "mmio-sram";
> + reg = <0x220000 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x220000 0x800>;
> + };
> +
> CP11X_LABEL(rtc): rtc@284000 {
> compatible = "marvell,armada-8k-rtc";
> reg = <0x284000 0x20>, <0x284080 0x24>;
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2021-02-04 20:04    [W:0.096 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site