lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: dsa: b53: Add SPI ID table
Date
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_spi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c
index 01e37b75471e..2b88f03e5252 100644
--- a/drivers/net/dsa/b53/b53_spi.c
+++ b/drivers/net/dsa/b53/b53_spi.c
@@ -349,6 +349,19 @@ static const struct of_device_id b53_spi_of_match[] = {
};
MODULE_DEVICE_TABLE(of, b53_spi_of_match);

+static const struct spi_device_id b53_spi_ids[] = {
+ { .name = "bcm5325" },
+ { .name = "bcm5365" },
+ { .name = "bcm5395" },
+ { .name = "bcm5397" },
+ { .name = "bcm5398" },
+ { .name = "bcm53115" },
+ { .name = "bcm53125" },
+ { .name = "bcm53128" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, b53_spi_ids);
+
static struct spi_driver b53_spi_driver = {
.driver = {
.name = "b53-switch",
@@ -357,6 +370,7 @@ static struct spi_driver b53_spi_driver = {
.probe = b53_spi_probe,
.remove = b53_spi_remove,
.shutdown = b53_spi_shutdown,
+ .id_table = b53_spi_ids,
};

module_spi_driver(b53_spi_driver);
--
2.25.1
\
 
 \ /
  Last update: 2021-12-02 05:17    [W:0.031 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site