lkml.org 
[lkml]   [2021]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] can: bittiming: replace CAN units with the generic ones from linux/units.h
Date
In [1], we introduced a set of units in linux/can/bittiming.h. Since
then, generic SI prefixes were added to linux/units.h in [2]. Those
new prefixes can perfectly replace CAN specific ones.

This patch replaces all occurrences of the CAN units with their
corresponding prefix (from linux/units) and the unit (as a comment)
according to below table.

CAN units SI metric prefix (from linux/units) + unit (as a comment)
------------------------------------------------------------------------
CAN_KBPS KILO /* BPS */
CAN_MBPS MEGA /* BPS */
CAM_MHZ MEGA /* Hz */

The definition are then removed from linux/can/bittiming.h

[1] commit 1d7750760b70 ("can: bittiming: add CAN_KBPS, CAN_MBPS and
CAN_MHZ macros")

[2] commit 26471d4a6cf8 ("units: Add SI metric prefix definitions")

Suggested-by: Jimmy Assarsson <extja@kvaser.com>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
* Changelog *

v1 -> v2

* v1 only used the prefix and the information about the unit
disappeared. v2 restores the unit information by using a comment.
---
drivers/net/can/dev/bittiming.c | 5 +++--
drivers/net/can/usb/etas_es58x/es581_4.c | 5 +++--
drivers/net/can/usb/etas_es58x/es58x_fd.c | 5 +++--
include/linux/can/bittiming.h | 7 -------
4 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c
index 0509625c3082..d5fca3bfaf9a 100644
--- a/drivers/net/can/dev/bittiming.c
+++ b/drivers/net/can/dev/bittiming.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
*/

+#include <linux/units.h>
#include <linux/can/dev.h>

#ifdef CONFIG_CAN_CALC_BITTIMING
@@ -81,9 +82,9 @@ int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
if (bt->sample_point) {
sample_point_nominal = bt->sample_point;
} else {
- if (bt->bitrate > 800 * CAN_KBPS)
+ if (bt->bitrate > 800 * KILO /* BPS */)
sample_point_nominal = 750;
- else if (bt->bitrate > 500 * CAN_KBPS)
+ else if (bt->bitrate > 500 * KILO /* BPS */)
sample_point_nominal = 800;
else
sample_point_nominal = 875;
diff --git a/drivers/net/can/usb/etas_es58x/es581_4.c b/drivers/net/can/usb/etas_es58x/es581_4.c
index 14e360c9f2c9..1bcdcece5ec7 100644
--- a/drivers/net/can/usb/etas_es58x/es581_4.c
+++ b/drivers/net/can/usb/etas_es58x/es581_4.c
@@ -10,6 +10,7 @@
*/

#include <linux/kernel.h>
+#include <linux/units.h>
#include <asm/unaligned.h>

#include "es58x_core.h"
@@ -469,8 +470,8 @@ const struct es58x_parameters es581_4_param = {
.bittiming_const = &es581_4_bittiming_const,
.data_bittiming_const = NULL,
.tdc_const = NULL,
- .bitrate_max = 1 * CAN_MBPS,
- .clock = {.freq = 50 * CAN_MHZ},
+ .bitrate_max = 1 * MEGA /* BPS */,
+ .clock = {.freq = 50 * MEGA /* Hz */},
.ctrlmode_supported = CAN_CTRLMODE_CC_LEN8_DLC,
.tx_start_of_frame = 0xAFAF,
.rx_start_of_frame = 0xFAFA,
diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.c b/drivers/net/can/usb/etas_es58x/es58x_fd.c
index 4f0cae29f4d8..ec87126e1a7d 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_fd.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_fd.c
@@ -12,6 +12,7 @@
*/

#include <linux/kernel.h>
+#include <linux/units.h>
#include <asm/unaligned.h>

#include "es58x_core.h"
@@ -522,8 +523,8 @@ const struct es58x_parameters es58x_fd_param = {
* Mbps work in an optimal environment but are not recommended
* for production environment.
*/
- .bitrate_max = 8 * CAN_MBPS,
- .clock = {.freq = 80 * CAN_MHZ},
+ .bitrate_max = 8 * MEGA /* BPS */,
+ .clock = {.freq = 80 * MEGA /* Hz */},
.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY |
CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO |
CAN_CTRLMODE_CC_LEN8_DLC | CAN_CTRLMODE_TDC_AUTO,
diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index 20b50baf3a02..a81652d1c6f3 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -12,13 +12,6 @@
#define CAN_SYNC_SEG 1


-/* Kilobits and Megabits per second */
-#define CAN_KBPS 1000UL
-#define CAN_MBPS 1000000UL
-
-/* Megahertz */
-#define CAN_MHZ 1000000UL
-
#define CAN_CTRLMODE_TDC_MASK \
(CAN_CTRLMODE_TDC_AUTO | CAN_CTRLMODE_TDC_MANUAL)

--
2.32.0
\
 
 \ /
  Last update: 2021-11-24 02:47    [W:0.418 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site