lkml.org 
[lkml]   [2021]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: am335x-pocketbeagle: unique gpio-line-names
Date
Based on linux-gpio discussion [1], it is best practice to make the
gpio-line-names unique. Generic names like "[ethernet]" are replaced
with the name of the unique signal on the AM3358 SoC ball corresponding
to the gpio line. "[NC]" is also renamed to the standard "NC" name to
represent "not connected".

[1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/

Signed-off-by: Drew Fustini <drew@beagleboard.org>
---
arch/arm/boot/dts/am335x-pocketbeagle.dts | 140 +++++++++++-----------
1 file changed, 70 insertions(+), 70 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index d526c5941c9b..209cdd17dc1e 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -61,51 +61,51 @@ vmmcsd_fixed: fixedregulator0 {

&gpio0 {
gpio-line-names =
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
"P1.08 [SPI0_CLK]",
"P1.10 [SPI0_MISO]",
"P1.12 [SPI0_MOSI]",
"P1.06 [SPI0_CS]",
"[MMC0_CD]",
"P2.29 [SPI1_CLK]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
+ "[SYSBOOT 12]",
+ "[SYSBOOT 13]",
+ "[SYSBOOT 14]",
+ "[SYSBOOT 15]",
"P1.26 [I2C2_SDA]",
"P1.28 [I2C2_SCL]",
"P2.11 [I2C1_SDA]",
"P2.09 [I2C1_SCL]",
- "[NC]",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
+ "NC",
"P2.31 [SPI1_CS]",
"P1.20 [PRU0.16]",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
"P2.03",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
"P1.34",
"P2.19",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
"P2.05 [UART4_RX]",
"P2.07 [UART4_TX]";
};

&gpio1 {
gpio-line-names =
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
"P2.25 [SPI1_MOSI]",
"P1.32 [UART0_RX]",
"P1.30 [UART0_TX]",
@@ -113,10 +113,10 @@ &gpio1 {
"P2.33",
"P2.22",
"P2.18",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
"P2.01 [PWM1A]",
- "[NC]",
+ "NC",
"P2.10",
"[USR LED 0]",
"[USR LED 1]",
@@ -126,35 +126,35 @@ &gpio1 {
"P2.04",
"P2.02",
"P2.08",
- "[NC]",
- "[NC]",
- "[NC]";
+ "NC",
+ "NC",
+ "NC";
};

&gpio2 {
gpio-line-names =
"P2.20",
"P2.17",
- "[NC]",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
+ "NC",
"[EEPROM_WP]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[SYSBOOT]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
+ "[SYSBOOT 0]",
+ "[SYSBOOT 1]",
+ "[SYSBOOT 2]",
+ "[SYSBOOT 3]",
+ "[SYSBOOT 4]",
+ "[SYSBOOT 5]",
+ "[SYSBOOT 6]",
+ "[SYSBOOT 7]",
+ "[SYSBOOT 8]",
+ "[SYSBOOT 9]",
+ "[SYSBOOT 10]",
+ "[SYSBOOT 11]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
"P2.35 [AIN5]",
"P1.02 [AIN6]",
"P1.35 [PRU1.10]",
@@ -169,19 +169,19 @@ &gpio2 {

&gpio3 {
gpio-line-names =
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
"[I2C0_SDA]",
"[I2C0_SCL]",
- "[JTAG]",
- "[JTAG]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
+ "[JTAG EMU0]",
+ "[JTAG EMU1]",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
"P1.03 [USB1]",
"P1.36 [PWM0A]",
"P1.33 [PRU0.1]",
@@ -191,16 +191,16 @@ &gpio3 {
"P2.34 [PRU0.5]",
"P2.28 [PRU0.6]",
"P1.29 [PRU0.7]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]",
- "[NC]";
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
};

&am33xx_pinmux {
--
2.25.1
\
 
 \ /
  Last update: 2021-01-27 04:50    [W:0.113 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site